Califone DVD Player DVD105 User Manual

DVD / VIDEO CD / MP3 / CD - PLAYER  
DVD105  
OPERATION MANUAL  
 
Getting Started  
Before attempting to connect, operate or adjust this product, please read these instruction  
completely and keep this manual for future reference.  
Dear customers :  
May we take this opportunity to thank you for purchasing this DVD player.  
We strongly recommend that you carefully study the operating instructions before operating the unit.  
Main Features  
Fully compatible with DVD, Video CD 1.0/1.1/2.0, CD and MP3  
DTS - digital output.  
Compatible with full DVD playback functions : multi-angle, multi-subtitle, parental control, etc.  
Advanced 10-bit video D/A converter with over 500 lines of horizontal resolution.  
Video output : Normal video output, S-Video output.  
Audio output : 2ch mixed stereo output, Coaxial digital output, Linear PCM output.  
NTSC/PAL discs compatibility.  
Features of playback specifications  
This product complies the MPEG II standard.  
NTSC - 720 x 480  
PAL  
- 720 x 576  
Features of audio specifications  
DOLBY Digital AC-3 digital output  
– DTS (Digital Theater System) digital output  
– Linear PCM output  
Playback features  
Fast forwards and fast backwards  
Multi-speed slow motion playback  
Zooming playback  
Repeat / Random playback  
Programmable playback  
Numeric selection  
Time search  
3
 
Getting Started  
Disc types  
Disc size 12cm  
single side, single layer / single side, double layer  
PAL and NTSC DVD disc  
Audio & Video  
Audio & Video  
Playback time 135min / 240min max.  
Disc size 12cm / 8cm  
VCD disc  
Playback time 74min/20min max.  
Disc size 12cm / 8cm  
CD disc  
Audio  
Audio  
Playback time 74min / 20min max  
MP3 format disc  
MP3  
* Player is CD-R, CD-RW compatible.  
Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are correctly treated.  
Region Management Information  
This DVD Player is disigned and manufactured to respond to the Region Management Information that is  
recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region  
number of this DVD Player, this DVD player cannot play that disc.  
This Region number of this DVD player is  
.
Disc manintenace  
– Before playback, wipe the disc from the center hole toward the outer edge with a clean cloth.  
– Never use bezine, thinner, cleaning fluid, static electricity prevention liquids or any other solvent.  
Note : Dirty disc may cause bad picture.  
Correct  
Incorrect  
From the center to the edge  
4
 
Safety precautions  
Warning  
Attention  
To avoid electrical shock, do not open the  
cabinet, refer servicing to qualified personnel  
only.  
If smoke, malodor or unrelated noise are emit-  
ted from the unit, turn off the power and dis-  
connect the AC power cord.  
Warning  
Attention  
Keep the unit away from flower vases, tubs,  
sinks, etc. If liquids are spilt into the unit, seri-  
ous damage could occur.  
Touching the unit is dangerous especially if  
during thunder.  
Warning  
Attention  
Do not expose this equipment to rain or  
moisture.  
When left unused for a long period of time,  
the unit should be unplugged from the house-  
hold AC outlet.  
Warning  
Attention  
Be sure to turn the unit off and disconnect the AC  
power cord before cleaning the unit surface. If the  
surface is dirty, wipe clean with a cloth which has  
been dipped in a weak soap and water solution and  
wrung out thoroughly, and then wipe again with a  
dry cloth.  
Do not block ventilation holes of the unit so  
that air can circulate freely,  
Note: This unit is a class 1 laser product and uses a visible laser beam which could cause hazardous  
radiation exposure if directed. Be sure to operate it correctly as instructed.  
5
 
Getting Started  
Accessories  
AC Line Cord  
DC Car Adaptor (Cigarette Adaptor)  
Remote Control  
AV Cable  
DC CAR ADAPTOR (Cigarette Adaptor) / CORD  
The supplied DC car adaptor/cord is designed for use with vehicles  
equipped with a 12 volt negative ground electrical system only.  
The equipment is compatible if the negative (-) terminal of the  
battery is connected to the vehicle’s metal body/chassis. If unsure,  
contact the vehicles’s dealer.  
Plug the small end of the car adaptor into the DC 12V jack and  
then plug the other end into the cigarette lighter socket. This  
indicator lights when the power is on.  
TO DC 12V JACK  
PRECAUTIONS  
• USE ONLY THE SUPPLIED DC CAR ADAPTOR/CORD PROVIDED. OTHER ADAPTORS COULD DAMAGE THE PLAYER.  
• IF THE INSIDE OF THE VEHICLE’S CIGARETTE LIGHTER SOCKET IS DIRTY WITH ASHES OR DUST, THE PLUG SELECTION  
MAY BECOME HOT AS A RESULT OF POOR ELECTRICAL CONTACT. BE SURE IT IS CLEAN BEFORE USE.  
• AFTER USE, DISCONNECT THE CORD’S PLUGS FROM BOTH THE PLAYER AND THE CIGARETTE LIGHTER.  
• SHOULD THIS PLAYER CAUSE RECEPTION INTERFERENCE TO NEARBY RADIO. INCREASE THE DISTANCE BETWEEN PLAYER  
AND RECEVIER.  
FUSE REPLACEMENT  
Should the player fail to operate with the DC car adaptor/cord, check the fuse  
(2.5A). If blown, check all connections and inspect the cord for any damage.  
Indicator  
Always replace the fuse with same type and rating.  
If the fuse blows again after replacement, this indicates a potential problem. DO  
Fuse  
NOT replace fuse with a higher rating. Doing so, may cause damge to the player.  
Battery installation (remote control unit)  
1. Remove the battery cover.  
2. Insert two batteries (AA, R6, UM-3 types) making sure the polarity (+/-) matches the marks inside the unit.  
3. Replace the cover.  
– Do not attempt to recharge, short-circuit, disabssemble, heat or throw  
the batteries into the fire.  
+
– Do not mix old and new batteries  
+
Note : Weak batteries can leak and serveraly damage the remote con-  
trol unit.  
6
 
Remote Control Unit  
1.  
2.  
3.  
4.  
GUI Button  
Numeric Buttons  
Shift Button  
1
17  
Direction Buttons  
( Up / Down/ Left/ Right)  
Chapter Button  
18  
19  
5.  
6.  
7.  
8.  
9.  
Play Button  
2
3
Subtitle Button  
Fast Backward Button (FR)  
Angle Button  
20  
21  
10. Audio Button  
11. Program Button  
4
5
22  
12. Mute Button  
13. Return Button  
14. Slow Button  
23  
24  
25  
6
7
8
9
15. Repeat Button  
16. Fast Button  
26  
17. Setup Button  
18. Power On/Off  
19. Zoom Button  
20. Enter Button  
27  
28  
29  
10  
11  
12  
13  
21. Root Button  
30  
31  
22. Pause / Step Button  
23. Volume Control  
24. Fast Forward Button (FF)  
25. Stop Button  
14  
15  
16  
32  
26. PBC Button  
33  
34  
27. Digest Button  
28. Bookmark Button  
29. Repeat A - B Button  
30. Cancel Button  
31. Search Button  
32. Next Button  
33. Effect Button  
34. Previous Button  
7
 
Getting Started  
System Connection  
Warning : Turn off the power and keep AC cord pulled out from the outlet when con-  
necting the system.  
AUDIO  
OUT  
VIDEO  
OUT  
R
L
VIDEO CORD  
L
R
AUDIO  
DIGITAL  
OUT  
AUDIO  
S-VIDEO  
R
L
VIDEO  
DC 12V  
LINE OUT  
S-VIDEO CORD  
(OPTIONAL)  
AC OUTLET  
ON THE WALL  
ADAPTOR  
AUDIO CORD (OPTIONAL)  
COAXIAL  
AUDIO CABLE  
(OPTIONAL)  
TO STEREO TV OR  
TO COAXIAL DIGITAL  
AUDIO INPUT  
OTHER AUDIO  
EQUIPMENTS  
CONNECTOR  
TO AUDIO  
INPUT CONNECTOR  
(FRONT L/R)  
VIDEO  
IN  
S-VIDEO  
AMPLIFIER WITH 5.1 CH INPUT CONNECTION  
(SOLD SEPARATELY)  
8
 
Getting Started  
Front Panel Control  
(Most of the function can be controlled by remote control unit.)  
1
2 3  
4
5
6 7  
8
9 10 11 12  
13  
14 15 16 17  
1. Push for OPEN / CLOSE  
2. Phone Jack  
10. Pause Button  
11. Skip Forward Button  
12. Stop Button  
3. Phone Volume Control  
4. Power Switch (Standby ON/OFF)  
5. LCD Display  
13. DC 12V Input Jack  
14. S-Video Socket (optional)  
15. Audio Digital Out Socket  
16. Line Out Jack - Audio R/L  
17. Line Out Jack - Video  
6. ON/Standby LED  
7. Remote Sensor  
8. Play Button  
9. Skip Backward Button  
LCD Display  
1
7
4
6
5
1. Play Mode Indicator  
2. Play Indicator  
3. Pause Indicator  
4. Chapter / Track Number  
5. Playback Time  
2
3
6. Repeat Indicator  
7. Disc Type Indicator  
9
 
Function Button (Remote Control)  
POWER Button ( ) [18]  
The POWER button is used to toggle the DVD player standby mode and power on mode.  
In standby mode, make sure red LED is on; press the POWER button and the player will turn on, and LED will  
turn off, initialize, and begin to load the disc if there is a disc present.  
BOOKMARK Button [28]  
This button is used to store specific portions of the disc in memory and play them immediately whenever you  
want without the need to search.  
A-B REPEAT Button [29]  
Pressing this button once marks A, pressing it twice marks B and causes the player to repeat from A to B.  
SUBTITLE Button [7]  
This button is used to select the subtitle language and enables or disables the display or subtitles form the DVD  
Disc.  
ANGLE Button [9]  
This button is used to select the active angle, when angles are available (in DVD format only).  
SETUP Button [17]  
Pressing this button while the player is in Stop mode brings up the Setup Menu.  
CHAPTER Button [5]  
A DVD is divided into long sections of video and/or music, which are called Chapters. The CHAPTER button is  
used to select the chapter using the chapter menu. This especially useful when you play a DVD that contains  
serveral titles or chapters.  
ROOT (MENU) Button [21]  
Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain  
guide menus, and DVDs with multiple languages may contain audio and subtitle language menus. these  
menus are called "DVD" menus. This button is used to select the language for the subtitles and the language  
for the sound, etc. In addition, this button is used to toggle PBC control while playing the DVD.  
CURSOR (DIRECTION) Button [4]  
These buttons " "/ " "/ " "/ " " are used to select the items in a horizontal direction or vertical direction in  
DVD menu mode. GUI display mode, or SETUP mode.  
ENTER Button [20]  
Pressing this button selects the button highlighted currently when the player is in DVD menu mode, GUI display  
mode or SETUP mode.  
GUI Button [1]  
This button is used to display the information of the playing disc and the operating state of the player. GUI  
stands for Graphic User Interrface.  
RETURN [13]  
When PBC is ON, this button is used to return to the previous menu screen. (For VCD only)  
PROGRAM [11]  
This button is used to store the track number of the Video CD or CD. Use this feature to play the tracks in a  
desired order. Anywhere from two to 30 tracks can be set in a program  
FF Button (Fast Forward  
) [24]  
This button is used to scan forward through the audio and video at 3-level speeds as X2, X4 and X8.  
10  
 
FR Button (Fast Reverse  
) [8]  
This button is used to scan backward through the audio and video at 3-level speeds as X2, X4 and X8.  
PLAY Button [6]  
This button is used to play the disc.  
STOP Button ( ) [25]  
This button is used to stop the playing of the disc.  
PREVIOUS Button [34]  
Press this button to move back to beginning of the previous chapter or track.  
NEXT Button [32]  
Press this button to move ahead to the beginning of the next chapter or track.  
AUDIO Button [10]  
This button is used to set or reset the virtual surround sound.  
PAUSE / STEP Button ( ) [22]  
This button is used to pause a playing disc temporarily, and you can see the pictures step by step, too.  
SLOW Button [14]  
This button is used to play a DVD disc slowly at 3-level speeds as 1/2, 1/4 and 1/8.  
FAST Button [16]  
This button is used to play a DVD disc quickly.  
1 2 3  
4 5 6  
7 8 9  
ZOOM Button [19]  
This button is used to view a scene close-up during playback of the disc. (DVD, Video CD).  
Use Numeric buttons (0 to 9) or cursor " "/ " "/ " "/ " " buttons to choose one zone to  
view a scene close up.  
NUMERIC 1-9, 0, and +10 Buttons [2]  
These buttons are used to input numbers. Use the +10 button to input numbers of 10 or over.  
To input 10 : +10 0;  
To input 25 : +10 +10 +5.  
CANCEL Button [30]  
This button is used to clear numbers that you have input.  
EFFECT Button [33]  
This button is used to set amount of TREBLE, BASS, 3D sound effect. (for VCD only)  
MUTE Button [12]  
Press this button to switch OFF the sound. Press once again to switch ON the sound.  
SHIFT Button [3]  
This button is used to switch TITLE MENU and current playing. (For some DVD discs only)  
SEARCH Button [31]  
Press this button TITLE, CHAPTER, TIME of DVD GUI will be display.  
TITLE  
Displays the current title. Use the " "/ " " button to move the cursor to the icon. Use the " "/  
ꢂ ꢃ  
"
" button to select the required title. Press ENTER to confirm the selection.  
CHAPTER Displays the current chapter. Use the " "/ " " button to move the cursor to the icon. Use the  
"
"/ " " button to select the required chapter. Press ENTER to confirm the selection.  
TIME  
Displays the current time. Use the " "/ " " button to move the cursor to the  
00:00:00. Input the time using the Number buttons ( 0 to 9 ), and press ENTER to confirm the  
selection.  
11  
 
DIGEST Button [27]  
Press this button during VCD 2.0 higher playback, 9 frames will appear on screen, use numeric buttons (0 to 9)  
or  
frame.  
cursor buttons to choose one frame. Then press ENTER to start playing from the selected  
/
/
/
PBC Button [26]  
This button is used to set PBC function to ON and OFF. When PBC is "OFF", the system will display the menu  
of VCD. Use Number Buttons ( 0 to 9, +10 ) to make your selection. When PBC is "ON" the system will be in  
sequential play mode.  
VOLUME UP/DOWN Buttons (  
These buttons control volume level.  
) [23]  
/
DVD Player Operation  
This chapter describe how to play a DVD, CD or VCD. Depending on the DVD or VCD, some operations may  
be different or restricted. Refer to the instructions supplied with your DVD or VCD disc.  
Each disc placed into the DVD Player has a built-in use interface that allows you to explore the information on  
the disc, such as the title and chapter information. In order to access that information, you must use the remote  
control or front panel. The following sections describe the relationship of the remote buttons to the disc menu  
interface. There are a number of scenarios associated with remote button requests, some of which will, in fact,  
result in a Not Valid ( ) response. Example; you press the CHAPTER button during playback mode. This  
button has no meaning here and will result a Not Valid message being displayed.  
The DVD Player has a wide range and complete set of functions that it can perform. Some of these functions  
can be activated from front panel keypad, but most of them can only be accessed from the IR remote control,  
therefore, the following instructions describe the functions of the remote control only.  
Preparation  
Turn on the TV and select the video input source connected to the unit.  
When you want to enjoy the sound of disc from the audio system, turn on the audio system and select the  
input source connected to the unit.  
Set the TV screen type correctly to match your TV.  
PLAYING DISCS  
1. Press the POWER button of the main unit  
The player enters the standby mode and the STANDBY indicator above the POWER button lights up in red.  
2. Press the POWER button on the remote control  
The player enters the operation mode and the STANDBY indicator above the POWER button will turn off  
and LCD will turn on.  
Each time the POWER button on the remote control is pressed, the unit toggle between the operating  
mode and the standby mode.  
3. Press the OPEN/CLOSE to open the disc tray.  
12  
 
4. Press the PLAY button  
When playing a DVD, a DVD menu or title menu may appear on the TV.  
When playing a VCD/SVCD, a VCD/SVCD menu screen may appear, depending on the VCD/SVCD.  
When playing a MP3/CD, a MP3/CD menu screen will appear.  
5. Use the cursor buttons to select the desired item  
For some discs there is a second menu screen. If so, press the ENTER button to display the next menu  
screen.  
The cursor buttons do not work for VCDs. Use the number button to select the desired item.  
6. Press the ENTER button  
The desired item is selected and playback starts.  
You can return to the menu screen by pressing the CHAPTER button and the ENTER button while the  
DVD is playing, though this depends on the disc.  
If the Not Valid () symbol appears on the TV screen while buttons are being operated, that operation is  
not possible on the player or with that disc.  
If you leave the player in pause or stop mode for 3 minutes, the screen saver image appears automati-  
cally .  
STOPPING PLAYBACK  
During playback, press the STOP button or OPEN/CLOSE.  
Resume Function  
This feature allows you to resume playback from the point where you stopped the disc.  
The player automatically stores the point where the STOP button was pressed during play (RESUME function),  
so you can resume playback from that point.  
1. While playing a disc, press the STOP button to stop playback.  
The RESUME function works only with titles for which the elapsed playing time appears on the player’s  
LCD during playback.  
When the door is opened or the STOP button is pressed again, the RESUME function will be cleared.  
This feature will not be cleared even if the player is set to standby mode  
2. Press the PLAY button  
The player starts playback from the point where you stopped the disc in step 1.  
To play from the beginning of the disc, when the playing time appears on the player’s LCD before you  
start playing, press the STOP button to reset the playing time, and then press the PLAY button.  
Resume Play may not be available depending on the DVD.  
Resume Play is not available in Program Play mode.  
Depending on where you stopped the disc, the player may resume playback from a slightly different  
point.  
The point where you stopped playing is cleared when :  
- You open or close the door.  
- You disconnect the AC power cord.  
- You turn off the power by pressing the POWER button on the player.  
- You change the play mode.  
- You start playback after selecting a title, chapter or track.  
13  
 
- You change the settings of TV TYPE in SCREEN SETUP in the setup display  
- You change the settings of PARENTAL CONTROL in CUSTOME SETUP in the setup display.  
If you do not want to continue playing the disc, to save electricity either, press the POWER button on the  
player to turn the power off, or press the POWER button on the remote control unit to set the power to the  
standby mode.  
PLAYING AT VARIOUS SPEEDS / FRAME BY FRAME  
Playing the Still Pictures  
During playback, press the PAUSE/STEP button.  
Press the PLAY button to resume normal playback.  
Playing Frame by Frame (for DVD and VCD)  
During playback, press the PAUSE/STEP button.  
The picture moves forward one frame each time the button is pressed.  
Press the PLAY button to resume normal playback.  
Forward / Reverse Searching  
During playback, press one of the SEARCH (  
,
) buttons :  
FR  
FF  
: Reverse direction  
: Forward direction  
When pressed again, the search speed inscreases. Each time the SEARCH button is pressed, the speed  
increase as follows : X2 X4 X8 X2  
Press the PLAY button to resume normal playback.  
In some cases the menu screen may reappear when one of SEARCH buttons is pressed during menu  
playback on VCD/DVD/CD.  
Skipping to the Beginning of Chapters or Tracks  
During playback, press one of the SKIP buttons (PREVIOUS button and NEXT button)  
A number of chapters or tracks equal to the number of times the button is pressed is skipped.  
When the skip back button is pressed once, the pickup returns to the beginning of the currently playing  
chapter or track.  
In some cases the menu screen may reappear when one of the SKIP buttons is pressed during menu  
playback on VCD/DVD/CD.  
Slow Playback (For DVD and VCD)  
During playback, press the SLOW buttons. When pressed again, the slow play speed increases. Each time  
the SLOW button is pressed, the speed increase as follows : 1/2 1/4 1/8 NORMAL 1/2  
Press the PLAY button to resume normal playback.  
Reverse slow play is not possible.  
14  
 
USING THE MENUS  
Using the Chapter Menu  
A DVD is divided into long sections of a picture of music piece called Chapters. When you play a DVD that  
contains several chapters, you can select the title you want using the chapter menu. to use the chapter feature  
on your DVD player.  
1. Press the SHIFT button  
The “title menu” appears on the TV screen. The contents of the menu vary from disc to disc.  
If the SHIFT button is pressed again, the disc returns to the point at which the title menu was called out  
and playback resumes from that point.  
2. Press the number buttons to select the title you want to play.  
3. Press the ENTER button  
The Player starts playing the selected title. Playback also starts if the PLAY button is pressed.-  
Depending on the DVD, you may not be able to select the title.  
Depending on the DVD, a chapter menu may simply be called a menu or title menu in the instructions  
supplied with the disc.  
Using the DVD Menu  
Some DVDs include special menus called DVD menus. for example, DVDs with complex contents may contain  
guide menus, and DVDs with multiple languages may contain audio and subtitle, language menus. These  
menus are called DVD menus. When you play these DVDs, you can select the language for the subtitles, the  
language for the sound, etc., using the DVD menu.  
1. Press the ROOT button  
The “root menu” appears on the TV screen. The contents of the menu vary from disc to disc.  
If the ROOT button is pressed again, the disc returns to the point at which the DVD menu was called out  
and playback resumes from that point.  
2. Press the number buttons to select the item you want to change, or press the cursor buttons (  
/
ꢂ ꢃ ꢁ  
/
/
).  
3. Press the ENTER button  
If more menus appear, repeat steps 2 and 3.  
If you want to select the language for the DVD menu, change the setting using LANGUAGE SETUP in  
the setup display.  
Depending on the DVD, a DVD menu may simply be called a menu in the instructions supplied with the  
disc.  
15  
 
PLAYING VCD WITH PBC FUNCTION (PBC PLAYBACK)  
When playing VCDs with PBC functions (Ver 2.0 discs), you can enjoy simple interactive operations with search  
functions. PBC Playback allows you to play VCDs interactively, following the menu screen on the TV screen.  
1. Start Playing a VCD with PBC functions, following the Step 1 to 4 in Playing Discs.  
2. Select the item number you want on the player  
Press the number button of the item you want on the remote control unit.  
3. Press the ENTER button  
4. Follows the instructions on the menu screen for interactive operations.  
Refer to the instructions supplied with the disc, as the operating procedures may differ according to the  
VCD.  
Going back to the menu screen:  
Press the RETURN, FR or FF buttons.  
To cancel PBC playback of a VCD with PBC functions and play the disc in continuous play mode:  
1. Press the STOP button while the VCDs menu screen is displayed.  
The display switched from PBC to the time display.  
2. Use the number buttons to input the desired track number.  
To play the disc without using the menu playback function:  
Refer to the discs jacket, etc, for the track number  
To start playback from the beginning of the disc, press the number button.  
Return to menu playback  
Press the STOP button to stop playback, then press the ROOT button.  
PBC menu screen appears on the TV.  
USING THE GUI SCREENS  
Use this function to display and change information on the disc (titles, chapters, time, audio, subtitles, angles,  
etc.) and on the player (repeat, play mode, markers, etc).  
1. In the play or stop mode, press the GUI button  
The GUI (Graphical User Interface) screen appears. The GUI will be different for different discs. The functions  
of the DVD Player are similar for DVD, SVCD, VCD and CD discs.  
The picture on the TV screen switches each time the button is pressed.  
16  
 
THE ITEMS DISPLAYED DIFFER FROM DISC TO DISC  
- - / - -  
- - / - -  
DVD GUI  
TITLE  
Displays the current title. Use the " "/ " " button to move the cursor to the icon. Use the  
ꢂ ꢃ  
"
"/ " " button to select the required title. Press ENTER to confirm the selection.  
CHAPTER  
TIME  
Displays the current chapter. Use the " "/ " " button to move the cursor to the icon. Use  
ꢂ ꢃ  
the " "/ " " button to select the required chapter. Press ENTER to confirm the selection.  
ꢀ ꢁ  
Displays the current time. Use the " "/ " " button to move the cursor to the  
00:00:00. Input the time using the Number buttons ( 0 to 9 ), and press ENTER to confirm  
the selection.  
AUDIO CHANNAL The Audio Channel selection icon. Use the " "/ " " button to move the cursor to the icon.  
ꢂ ꢃ  
Use the " "/ " " button or Number buttons ( 0 to 9 ) to select the required audio channel.  
ꢀ ꢁ  
Press ENTER to confirm the selection.  
SUBTITLE  
ANGLE  
Displays current subtitle language. Use the " "/ " " button to move the cursor to the icon.  
ꢂ ꢃ  
Use the " "/ " " button or Number buttons ( 0 to 9 ) to select the required subtitle language  
ꢀ ꢁ  
or to switch the subtitle function on or off. Press ENTER to confirm the selection.  
The Multi-angle icon. Use this menu to select different angles of the pictures being played.  
Use the " "/ " " button to move the cursor to the icon. Use the " "/ " " button to select  
ꢂ ꢃ  
ꢀ ꢁ  
the required angle. Press ENTER to confirm the selection.  
REPEAT  
The Repeat Play function. Use the " "/ " " button to move the cursor to the icon. Use the  
ꢂ ꢃ  
"
"/ " " button to select the required function. Press ENTER to confirm the selection.  
Repeat Chapter Repeat Title Repeat Disk Repeat Off  
REPEAT A - B  
The Repeat Play from A to B function. Use the " "/ " " button to move the cursor to the  
icon. Use the " "/ " " button to select the required repeat play function. Press ENTER to  
ꢀ ꢁ  
confirm the selection.  
Set Start Point A Set End Point B Cancel Repeat.  
BOOKMARK  
The Set Bookmark function. Use the " "/ " " button to move the cursor to the icon. Use  
the number buttons ( 0 to 9 ) to select the required position. Press ENTER to confirm the  
ꢂ ꢃ  
selection. At maximum, five bookmarks (1, 2, 3, 4, 5) can be set. This operation is valid only  
when BOOKMARK is displyed on the On Screen Display. you may also use the " "/ "  
button to move the cursor to a bookmark and press ENTER to jump to the position set and  
"
ꢂ ꢃ  
play.  
17  
 
SVCD / VCD GUI  
TRACK  
TIME  
Displays the current track. Use the " "/ " " button to move the cursor to the icon. Use the  
ꢂ ꢃ  
"
"/ " " button or number buttons ( 0 to 9 ) to select the required track. Press ENTER to  
ꢀ ꢁ  
confirm the selection.  
Displays the current time. Use the " "/ " " button to move the cursor to the  
00:00:00. Input the time using the Number buttons ( 0 to 9 ), and press ENTER to confirm  
the selection.  
AUDIO CHANNAL The Audio Channel selection icon. Use the " "/ " " button to move the cursor to the icon.  
ꢂ ꢃ  
Use the " "/ " " button or Number buttons ( 0 to 9 ) to select the required audio channel.  
ꢀ ꢁ  
Press ENTER to confirm the selection. You may choose Stereo, Left Audio Channel or  
Right Audio Channel.  
PLAY MODE  
Play mode selection. Use the " "/ " " button to move the cursor to the icon. Use the  
"
"/ " " button or Number buttons ( 0 to 9 ) to select the required audio channel. Press  
ENTER to confirm the selection. You may select any of the three play modes: Squential,  
Programmed and Random play mode.  
PBC  
When PBC is "ON", the system will display the menu of VCD/DVD. Use the Number Buttons  
( 0 to 9 ) to make your selection. When PBC is "OFF" the system will be in sequential play  
mode.  
REPEAT  
REPEAT A - B  
Repeat Play function. Use the " "/ " " button to move the cursor to the icon. Use the  
"
"/ " " button to select the required play function. Press ENTER to confirm the selection.  
ꢀ ꢁ  
Repeat Chapter Repeat Title Repeat Disk Repeat Off  
The Repeat Play from A to B function. Use the " "/ " " button to move the cursor to the  
icon. Use the " "/ " " button to select the required repeat play function. Press ENTER to  
confirm the selection.  
ꢀ ꢁ  
Set Start Point A Set End Point B Cancel Repeat.  
BOOKMARK  
The Set Bookmark function. Use the " "/ " " button to move the cursor to the icon. Use  
the number buttons ( 0 to 9 ) to select the required position. Press ENTER to confirm the  
ꢂ ꢃ  
selection. At maximum, five bookmarks (1, 2, 3, 4, 5) can be set. This operation is valid only  
when BOOKMARK is displyed on the On Screen Display. you may also use the " "/ "  
button to move the cursor to a bookmark and press ENTER to jump to the position set and  
"
ꢂ ꢃ  
play.  
CDDA GUI  
The operations of the CDDA GUI are the same as for the VCD/SVCD GUI, with the exception that it does not  
offer the PBC Function.  
18  
 
SETTINGS AND ADJUSTMENTS  
This chapter describes how to set and how to adjust using the on-screen SETUP menu. Most setting and  
adjustments are required to be set when you first use the player.  
USING THE SETUP DISPLAY  
Using the setup display, you can do the initial setup, adjust the picture and sound quality, and set the various  
outputs. You can also set a language for the subtitles and the setup display and limit play back by children.  
• You can display the setup display only when the player is in stop mode.  
1. Press the SETUP button to display the setup display on the TV screen.  
LANG  
VIDEO  
2. Select the main item you want using the " "/ " " buttons, and the press the  
AUDIO  
CHILD  
OTHER  
EXIT  
ENTER button.  
To Cancel Using the Setup Display  
• Press the SETUP button on the remote.  
To Return to the Previous Menu  
• Press the " " button on the remote.  
SETTING THE LANGUAGE FOR DISPLAY AND SOUND (LANGUAGE SETUP)  
Select LANG using RETURN or " " after pressing the SETUP  
button. The Language Setup allows the user to set various  
languages for the on-screen display or sound.  
O.S.D ENGLISH  
AUDIO ENGLISH  
SUBTITLE ENGLISH  
DISC ENGLISH  
LANG  
VIDEO  
AUDIO  
CHILD  
OTHER  
EXIT  
OSD (On-Screen Display) Language Menu  
The OSD Language Menu allows the user to select the language  
for the on-screen display. Use RETURN or the " "/ " " buttons  
ꢀ ꢁ  
to select the appropriate setting. The user can select either  
English, German, Spanish, Italian and French for the OSD  
language.  
Audio Language Menu  
The Audio Language Menu allows the user to choose the preferred audio language. Use RETURN and " "/  
"
" buttons to select the appropriate setting. The user can select English, German, Spanish, Italian and  
French or Original (meaning the movies original language). the user can also enter a language code to utilize  
other language.  
Subtitle Menu  
the Subtitle Language Menu allows the user to choose the preferred language for subtitles. Use RETURN or  
"
"/ " " buttons to select the appropriate setting. The user can select English, German, Spanish, Italian,  
French or Original (meaning the movies original language). the user can also enter a language code to utilize  
other language.  
Disc Menu  
The Disc Menu allows the user to choose the preferred language for the disc start menu. Use RETURN and the  
"
"/ " " buttons to select the appropriate setting. The user can select English, German, Spanish, Italian and  
ꢀ ꢁ  
French or Original. The user can also enter a language code to utilize other language.  
19  
 
SETTING FOR VIDEO  
Select VIDEO after pressing the SETUP button.  
• The VIDEO SETUP allows you to set the display according to  
the playback conditions.  
SYSTEM NTSC  
ASPECT 4 : 3 PS  
OUTPUT S-VIDEO  
LANG  
VIDEO  
AUDIO  
CHILD  
OTHER  
EXIT  
System Settings  
The TV system menu allows the user to specify the display  
configuration of the TV monitor. Use RETURN and the " "/ "  
"
ꢀ ꢁ  
buttons to select the appropriate settings.  
• NTSC specifies display output in NTSC format.  
• PAL specifies display output in PAL format  
Aspect  
This menu allows the user to select the aspect ratio of the TV to  
be connected. Use RETURN and the " "/ " " buttons to select  
ꢀ ꢁ  
the appropriate settings.  
• 4:3 LETTER BOX : Use this when you connect a normal TV to the player. This displays a wide picture with  
bands displayed on the upper and lower portions of the screen.  
• 4:3 PAN SCAN : Use this when you connect a normal TV to the player. This displays the wide picture on the  
whole screen with a portion automatically cut off.  
• 16:9 WIDE SCREEN : Use this when you connect a wide-screen TV to the player.  
• Depending on the DVD, 4:3 LETTER BOX may be selected automatically instead of 4:3 PAN SCAN and vice  
versa.  
Video Output (Fixed)  
ANALOG 2 CH  
DIGITAL DOLBY DTS  
SETTING FOR AUDIO  
LANG  
VIDEO  
AUDIO  
CHILD  
OTHER  
EXIT  
Select AUDIO after pressing the SETUP button.  
• The AUDIO SETUP allows you to set audio preferences  
according to the playback conditions.  
D.R.C.  
BASS  
ON  
OFF  
Source Menu  
The Digital Menu allows the user to select the preferred source.  
• Use the " "/ " "/ " "/ " " cursor buttons to select DIGITAL, then press ENTER. By using " "/ " "  
buttons, the user can select either DOLBY DTS or LPCM. Press ENTER to finalize your selection. LPCM is  
uncompressed data, so none of stream information is lose. However, LPCM output can only support 2  
channel ouput. DIGITAL DTS is compressed data which can be converted to 5.1 channels. During the  
compression, however, some of the data is lost.  
DRC (Dynamic Range Control)  
Dynamic Range Control produces a clear sound with the volume turned down.  
• Use the cursor buttons " "/ " " to turn the DRC ON or OFF.  
ꢀ ꢁ  
BASS Menu  
The Size menu allows the user to select the size of speakers. Use the " "/ " "/ " "/ " " cursor buttons to  
ꢂ ꢃ ꢀ ꢁ  
select BASS, then press ENTER. By using " "/ " " buttons, the user can select either LARGE, SMALL or  
OFF. Press ENTER to finalize your selection.  
• LARGE : Normally select this option.  
• SMALL : When the sound cracks or the effect of the surround is difficult to hear, select this option. This  
activates the Dolby digital bass redirection circuitry and outputs the bass frequencies of the speaker from  
subwoofers.  
• OFF : Select this option for audio output without bass.  
Recommended Digital Audio Output settings.  
The optimum digital output setting depends on th the type of component connectd to the digital audio output  
connector.  
• When connecting an amplifier with a coaxial digital input connector which does not contain the Dolby digital  
(AC-3) or DTS decoder, be sure to select "LPCM" at the Digital Menu.  
20  
 
SETTING FOR RATING (PARENTAL CONTROL)  
This section of the SETUP Menu allows users to control the content  
of movie playback from 1 (Children) to 8 (Adult).  
RATING LEVEL 8  
CHANGE PASSWORD  
CANCEL PASSWORD  
LANG  
VIDEO  
AUDIO  
CHILD  
OTHER  
EXIT  
Limiting Playback by Children (Parental Control)  
Select CUSTOMER SETUP after pressing the SETUP button. The  
Parental Control function allows you to set a playback limitation  
level.  
1. Use the " "/ " "/ " "/ " " cursor buttons to select CHILD, then press ENTER.  
2. Enter a password in 4 digits using the number buttons, then press the ENTER button.  
3. Select LEVEL using the cursor" "/ " " buttons, then press the ENTER button and the display for setting  
the playback limitation level appears.  
• LEVEL 8 : for adult  
• LEVEL 7  
• LEVEL 6  
• LEVEL 5  
• LEVEL 4  
• LEVEL 3  
• LEVEL 2  
• LEVEL 1 : for kids  
• The lower the value is, the more strict the limitation.  
• Select the level you want using the cursor " "/ " " buttons, then press the ENTER button.  
Changing and Canceling the Password  
To change the password, use the cursor " "/ " "/ " "/ " " buttons to select CHANGE PASSWORD, then  
ꢃ ꢀ  
press ENTER button. Type in the new password using the number buttons and press ENTER.  
To cancel the password, use the cursor " "/ " "/ " "/ " " buttons to select CANCEL PASSWORD, then  
press ENTER.  
* Resetting code for rating setting : 6688.  
OTHER MENU  
This menu is used to change the colour of setup menu, or to reset the menu to default settings. Use the cursor  
"/ " "/ " "/ " " buttons to select OTHER, then press ENTER.  
"
Colour Menu  
To change the colour of the setup menu, use the cursor " "/  
"/ " "/ " " buttons to select COLOUR, then press ENTER.  
COLOUR  
VERSION  
FACTORY SETTING  
"
ꢃ ꢀ  
LANG  
VIDEO  
AUDIO  
CHILD  
OTHER  
EXIT  
Using cursor buttons, select the preferred colour (Blue, Orange,  
Yellow, Green, Violet).  
Factory Setting  
To return the setup menu to default settings, use the cursor " "/  
"
"/ " "/ " " buttons to select FACTORY SETTING, then press  
ꢃ ꢀ ꢁ  
ENTER. The setup menu will return to default values.  
MP3 MENU  
LEFT MENU  
Use " /" " button to select the required directory.  
ꢀ ꢁ  
(DIRECTORY TREE)  
RIGHT MENU  
(SONG NUMBER)  
Use " "/ " " button to move the cursor from left menu to the right menu or from right  
menu to left menu.  
When cursor in right menu, use the " ”/ ” " button. Press ENTER to confirm the  
selection.  
21  
 
SPECIFICATION  
Power source (AC/DC Adaptor) AC IN 120V 60Hz  
DC Out 12V  
Power consumption  
Laser  
< 35W, approx 12W (standby state)  
Wave length : 655mm  
Laser power : Class 1  
PAL / NTSC  
Signal System  
Output  
Digital audio output  
Phone Jack  
S-video  
Coxial digital output: pin jack  
ø3.5mm jack with level control  
Y output level: 1Vp-p (75);  
C output level: 0.300Vp-p (75) (PAL), 0.286Vp-p (75) (NTSC);  
connector: S-terminal  
Video  
Audio  
Ouput level: 1 Vp-p (75);  
Connector: pin jack (1 system)  
10 Bit D/A converter  
Output level: CD Disc - 1.3V ±0.3 / DVD Disc - 1V ±0.3 ; 1KHz, 0dB;  
Connector: pin jack.  
5.1ch mixed output: 1 system (2 channels)  
96kHz, 24 Bit D/A converter  
Audio characteristics  
Frequency  
DVD (linear audio): 2Hz –22kHz (48kHz sampling);  
2Hz~44kHz (96kHz sampling)  
CD audio: 2Hz~20kHz (EIAJ)  
CD audio: > 65dB  
S/N ratio  
Dynamic range  
DVD (linear audio): > 95dB  
CD audio: > 95dB  
Total harmonic distortion  
CD audio: 0.0025% (EIAJ)  
Operating status  
Accessories  
Dimension  
Weight  
Horizontal / Vertical  
Remote Control x 1, AC/DC Adaptor x 1, AV cable x 1, DC Car Adaptor x1  
225 (W) x 190 (D) x 72 (H) mm  
1.1 Kg. (without remote)  
* Design and specification are subjuect to change without notice.  
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D sym-  
bol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby  
Laboratories, Inc. All rights reserved.  
This product incorporates copyright protection technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.  
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended  
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Re-  
verse engineering or disassembly is prohibited.  
22  
 
TROUBLE SHOOTING  
Check the following guide for the possible cause of a problem before contacting service.  
Symptom  
Correction  
• Plug the power cord into the wall outlet and unit  
securely.  
Cause  
• The power cord is disconnected.  
No Power  
• Insert a disc. (Check that the DVD or audio CD  
indicator in the DVD display is lit.)  
• Select the appropriate video input mode on the  
TV so the picture from the DVD player appears  
on the TV screen.  
• No disc is inserted.  
The power is on, but DVD  
player does not work  
No Picture  
• The TV is not set to receive DVD signal  
output.  
• Connect the video cable into the jacks  
securely.  
• The video cable is not connected  
securely.  
• Turn on the TV.  
• The connected TV power is turned off  
• The equipment connected with the au-  
dio cable is not set to receive DVD sig-  
nal output.  
• Select the correct input mode of the audio re-  
ceiver so you can listen to the sound from the  
DVD player.  
No Sound  
• Connect the audio cable into the jacks  
securely.  
• The audio cables are not connected  
securely.  
• Turn on the equipment connected with the au-  
dio cable.  
• The power of the equipment connected  
with the audio cable is turned off.  
• The Digital Audio Output is set to the  
wrong position.  
• Set the Digital audio Output to the correct  
position, then turn on the DVD player again by  
pressing the POWER button.  
• Clean the disc.  
The playback picture is poor  
The DVD player does not  
start playback  
• The disc is dirty.  
• Insert a disc  
• No disc is inserted.  
• Insert a playable disc. (Check the disc type,  
color system and Regional code.)  
• Place the disc with the playback side down.  
• Place the disc on the disc tray correctly inside  
the guide.  
• An unplayable disc is inserted.  
• The disc is placed upside down.  
• The disc is not placed with the guide.  
• Clean the disc.  
• The disc is dirty.  
• Press the SET UP button to turn off the menu  
screen.  
• A menu is on the TV screen.  
• Cancel the Rating function or change the rating  
level.  
• The Rating level is set.  
• Point the remote control at the remote sensor  
of the DVD player.  
The Remote Control does • The remote control is not pointed at the  
not work properly  
remote sensor of the DVD player.  
• The remote control is too far from the  
DVD player.  
• Operate the remote control within about 23ft  
(7m).  
• Remove the obstacle.  
• There is an obstacle in the path of the  
remote control and the DVD player.  
• The batteries in the remote control are  
exhausted.  
• Replace the batteries with new ones.  
23  
 

Black Decker Saw CS1030L User Manual
Blanco Indoor Furnishings 513 686 User Manual
Blodgett Oven 1000 User Manual
Bogen Speaker ATS70GB User Manual
Bosch Appliances Cooktop NGM User Manual
Boston Acoustics Car Speaker boston mobile audio performance standard coaxial speakers User Manual
Braun Electric Shaver 5417 User Manual
Brother Fax Machine FAX 475e User Manual
CDA Convection Oven SV470 User Manual
Chauvet Home Safety Product Home Safety Product User Manual