Blomberg Refrigerator TSM1750u User Manual

Fully Integrated Larder  
Fridge  
TSM1750u  
Bedienungsanleitung  
Operating instructions  
 
CONTENTS  
1 Your Refrigerator  
3
4
5 Using your refrigerator 21  
Temperature setting button......... 21  
Defrosting................................... 21  
2 Warnings  
ELECTRICAL REQUIREMENTS.... 5  
WARNING! THIS APPLIANCE MUST  
BE EARTHED............................... 5  
ENERGY SAVING TIPS................. 6  
6 Maintenance and  
cleaning  
22  
Protection of plastic surfaces ..... 22  
3 Installation  
7
7 Do's and Don'ts  
23  
Points to be considered when re-  
transporting your refrigerator ........ 7  
Before operating your refrigerator . 7  
Electric connection ....................... 7  
Disposing of the packaging .......... 7  
Disposing of your old refrigerator .. 8  
Placing and Installation ................. 8  
IMPORTANT................................. 9  
INSTALLATION INSTRUCTIONS... 9  
Changing the Interior Lighting Bulb10  
Placing the refrigerator under the  
counter and adjusting the legs.... 11  
REVERSING THE DOORS.......... 12  
INSTALLATION INSTRUCTIONS -  
DETAILED STEP BY STEP.......... 14  
8 How To Obtain Service 25  
9 Guarantee Details  
26  
4 Before operating  
20  
EN  
2
 
1 Your Refrigerator  
Congratulations on your choice of a BLOMBERG quality Appliance which has  
been designed to give you service for many years.  
6
7
1
2
1
9
8
1
3
4
5
1- Body shelves  
2- Bulb thermostate box  
3- Sliding crisper cover  
4- Food storage cabin  
5- Adjustable front legs  
6- Egg compartment  
7- Door shelf  
8- Bottle shelf  
9- Bottle holder  
C The figures in this manual are schematic, and they may not be in exact  
accordance with your product. If the product you purchased does not have the  
related parts, then they are valid are for other models.  
EN  
 
3
2 Warnings  
•DO NOT connect your appliance to  
the electricity supply until all packing  
and transit protectors have been  
removed.  
• See Installation Instructions on on  
page 8 for information on suitable  
location.  
To obtain the best possible  
• Leave to stand for at least 4  
hours before switching on to allow  
compressor oil to settle if transported  
horizontally.  
performance and trouble free operation  
from your appliance it is very important  
to carefully read these instructions.  
• On delivery, check to make sure that  
the product is not damaged and that  
all the parts and accessories are in  
perfect condition.  
• Ensure that the plug remains readily  
accessible. Do not use multiple  
adapter bar or extension cable.  
• Failure to observe these instructions  
may invalidate your right to free service  
during the guarantee period.  
• Keep ventilation openings, in the  
appliance enclosure or in the built-in  
structure, clear of obstruction.  
• Do not use mechanical devices  
or other means to accelerate the  
defrosting process, other than those  
recommended by the manufacturer.  
• Do not damage the refrigerant circuit.  
• Do not use electrical appliances  
inside the food storage compartments  
of the appliance, unless they are  
of the type recommended by the  
manufacturer.  
• If you are discarding an old  
refrigerator with a lock or latch fitted  
to the door, disable the lock/latch,  
ensure that it is left in a safe condition  
to prevent the entrapment of young  
children.  
• This fridge/freezer must only be used  
for its intended purpose i.e the storing  
and freezing of edible foodstuff.  
• Do not dispose of the appliance on  
a fire. At BLOMBERG, the care and  
protection of our environment is an  
ongoing commitment. This appliance  
which is among the latest range  
introduced is particularly environment  
friendly. Your appliance contains non  
CFC / HFC natural substances in the  
cooling system (Called R600a) and in  
the insulation (Called cyclopentane)  
which are potentially flammable  
if exposed to fire. Therefore, take  
care not to damage, the cooling  
circuit / pipes of the appliance in  
transportation and in use. In case of  
damage do not expose the appliance  
to fire or potential ignition source and  
immediately ventilate the room where  
the appliance is situated.  
• We suggest you keep these  
instructions in a safe place for easy  
reference.  
• We suggest you contact your local  
authority for disposal information and  
facilities available.  
EN  
4
 
• This appliance is not intended for use  
by persons (including children) with  
reduced physical, sensory or mental  
capabilities, or lack of experience  
and knowledge, unless they have  
been given supervision or instruction  
concerning use of the appliance by a  
person responsible for their safety.  
• Children should be supervised to  
ensure that they do not play  
with the appliance.  
ELECTRICAL  
REQUIREMENTS  
Before you insert the plug into the wall  
socket make sure that the voltage and  
the frequency shown on the rating  
plate inside the appliance corresponds  
to your electricity supply.  
WARNING! THIS APPLIANCE  
MUST BE EARTHED  
If the fitted moulded plug is not  
suitable for your socket, then the plug  
should be cut off and an appropriate  
plug fitted. Destroy the old plug which  
is cut off as a plug with bared cord  
could cause a shock hazard if inserted  
into a socket elsewhere in the house.  
The moulded plug on this appliance  
incorporates a 13 A fuse. Should  
the fuse need to be replaced an  
ASTABEAB approved BS 1362 fuse  
of the same rating must be used. Do  
not forget to refit the fuse cover. In the  
event of losing the fuse cover the plug  
must not be used until a replacement  
fuse cover has been fitted. Colour  
of the replacement fuse cover must  
be the same colour as that visible on  
the pin face of the plug. Fuse covers  
are available from any good electrical  
store.  
Rating label is on the left hand side of  
fridge inner liner.  
We recommend that this appliance be  
connected to the mains supply via a  
suitable switched and fused socket.  
The appliance must be positioned so  
that the plug is accessible.  
Should the mains lead of the appliance  
become damaged or should it need  
replacing at any time, it must be  
replaced by a special purpose made  
mains lead which can only be obtained  
from a BLOMBERG Authorised Service  
Agent.  
EN  
5
 
IMPORTANT! FITTING A  
DIFFERENT PLUG  
ENERGY SAVING TIPS  
1- Ensure your appliance is installed in  
a well ventilated area.  
2- Ensure the time between buying  
chilled/frozen food and placing them in  
your appliance is kept to a minimum,  
particularly in summer. We recommend  
you use a cool bag or a special carrier  
bag to carry frozen food.  
3- Do not leave the door (s) of your  
appliance open longer than necessary  
and ensure they are closed properly  
after each opening.  
4- Defrost frozen food in the fridge  
compartment, so that frozen food acts  
as an ice pack to assist cooling in the  
fridge.  
As the colours of the wires in the  
mains lead of this appliance may  
not correspond with the coloured  
markings identifying the terminals in  
your plug proceed as follows: (See  
diagram).  
1. Connect the green-yellow or green  
(Earth) wire to the terminal in the plug  
marked ‘E’ or with the symbol  
coloured green and yellow or green.  
2. Connect the blue (Neutral) wire to  
the terminal in the plug marked ‘N’ or  
coloured black.  
3. Connect the brown (Live) wire to  
the terminal in the plug marked ‘Lor  
coloured red.  
or  
With alternative plugs a 13 A fuse must  
be fitted either in the plug or adaptor  
or in the main fuse box. If in doubt  
contact a qualified electrician.  
6mm.  
GREEN &  
YELLOW  
OR  
GREEN  
L
BROWN  
OR  
RED  
N
22mm.  
BLUE  
OR  
BLACK  
CORD GRIP  
EN  
6
 
3 Installation  
BPlease remember that the  
manufacturer shall not be held liable if  
the information given in the instruction  
manual is not observed.  
3.Clean the interior of the refrigerator as  
recommended in the “Maintenance  
and cleaning” section.  
4.Plug the refrigerator into the wall outlet.  
When the fridge door is open, the  
fridge compartment interior light will  
come on.  
Points to be considered  
when re-transporting your  
refrigerator  
1.Your refrigerator must be emptied and  
cleaned prior to any transportation.  
2.Shelves, accessories, crisper and etc.  
in your refrigerator must be fastened  
securely by adhesive tape against any  
jolt before repackaging.  
5.You will hear a noise as the  
compressor starts up. The liquid and  
gases sealed within the refrigeration  
system may also give rise to noise,  
even if the compressor is not running  
and this is quite normal.  
3.Packaging must be tied with thick  
tapes and strong ropes and the  
rules of transportation printed on the  
package must be followed.  
6.Front edges of the refrigerator may feel  
warm. This is normal. These areas  
are designed to be warm to avoid  
condensation  
Please do not forget…  
Electric connection  
Every recycled material is an  
indispensable source for the nature  
and for our national resources.  
If you wish to contribute to recycling  
the packaging materials, you can  
get further information from the  
environmental bodies or local  
authorities.  
Connect your product to a grounded  
socket which is being protected by a  
fuse with the appropriate capacity.  
Important:  
• The connection must be in compliance  
with national regulations.  
• The power cable plug must be easily  
accessible after installation.  
• The specified voltage must be equal to  
your mains voltage.  
Before operating your  
refrigerator  
Before starting to use your refrigerator  
check the following:  
• Extension cables and multiway plugs  
must not be used for connection.  
1.Is the interior of the refrigerator dry and  
can the air circulate freely in the rear  
of it?  
BA damaged power cable must be  
replaced by a qualified electrician.  
BProduct must not be operated before  
it is repaired! There is danger of  
electric shock!  
Disposing of the packaging  
The packing materials may be  
dangerous for children. Keep the  
packing materials out of the reach  
of children or dispose of them by  
classifying them in accordance  
2.Please install the 2 plastic wedges  
as illustrated in the figure. Plastic  
wedges will provide the required  
distance between your refrigerator  
and the wall in order to allow the air  
circulation. (The illustrated figure is  
only an example and does not match  
exactly with your product.)  
EN  
7
 
with the waste instructions. Do not  
dispose of them along with the normal  
household waste.  
3. There must be appropriate air  
ventilation around your refrigerator  
in order to achieve an efficient  
operation. If the refrigerator is to be  
placed in a recess in the wall, there  
must be at least 5 cm distance with  
the ceiling and at least 5 cm with  
the wall. If the floor is covered with  
a carpet, your product must be  
elevated 2.5 cm from the floor.  
4. Place your refrigerator on an even floor  
surface to prevent jolts.  
The packing of your refrigerator is  
produced from recyclable materials.  
Disposing of your old  
refrigerator  
Dispose of your old refrigerator without  
giving any harm to the environment.  
You may consult your authorised dealer  
or waste collection center of your  
municipality about the disposal of  
your refrigerator.  
Before disposing of your refrigerator, cut  
out the electric plug and, if there are  
any locks on the door, make them  
inoperable in order to protect children  
against any danger.  
5. Do not keep your refrigerator in  
ambient temperatures under 10°C.  
Placing and Installation  
A If the entrance door of the room  
where the refrigerator will be  
installed is not wide enough for the  
refrigerator to pass through, then call  
the authorised service to have them  
remove the doors of your refrigerator  
and pass it sideways through the  
door.  
1. Install your refrigerator to a place that  
allows ease of use.  
2. Keep your refrigerator away from heat  
sources, humid places and direct  
sunlight.  
EN  
8
 
IMPORTANT  
INSTALLATION INSTRUCTIONS  
1. To avoid a hazard due to instability  
of the appliance, it must be fixed in  
accordance with the instructions.  
2. Do not operate this applliance  
unlees installed to furniture.  
3. The appliance should be located on  
a smooth surface. The four front and  
back feet can be adjusted as required.  
To ensure that, your appliance is  
standing upright adjust the four front  
and back feet by turning clockwise  
or anti-clockwise, until the product is  
in firm contact with the floor. Correct  
adjustment of feet avoids excessive  
vibration and noise.  
“IMPORTANT: Care must be taken  
while cleaning / carrying the appliance  
to avoid touching the bottom of the  
condenser metal wires at the back of  
theappliance as you might injure your  
fingers and hands.  
“IMPORTANT: This appliance is  
not designed for stacking with any  
otherappliance.When positioning your  
appliance, take care not to damage  
your flooring, pipes,wall coverings etc.  
4. Refer to "Cleaning and Care"  
section to prepare your appliance for  
use.  
5. This appliance has been designed  
to operate in ambient temperatures  
between +10 and +32 degrees C (50  
and 90 degrees F). There fore if the  
appliance is installed in an unheated  
/ cold room (E.g.: Conservatory /  
annex / shed / garage etc.) then the  
appliance may not operate and as a  
result the storage time of food may be  
reduced.  
6. The appliance must be protected  
against rain, moisture and other  
atmospheric influences.  
EN  
9
 
Changing the Interior  
Lighting Bulb  
If the lamp does not operate, follow  
the following procedures:  
1. Switch off the electric connection of  
the refrigerator and pull out the plug.  
Remove all shelves and drawers for  
easy access.  
2. Remove the cover carefully by  
pressing it on the edge with your index  
finger, as seen in figure b. Try not to  
damage the plastic cover and interior  
facing.  
3. First, screw the bulb into its  
socket tightly and check whether it is  
loosened. Insert the plug again and  
switch on the electricity. If the bulb  
operates, replace the light cover by  
placing the back lock, pushing it onto  
its place.  
4. If the bulb does not operate,  
switch off the electric connection of  
the refrigerator and pull out the plug.  
Replace the bulb with a new 15 watt  
(maximum), screw covered E14 (SES)  
bulb.  
5. Immediately chuck out the damaged  
bulb carefully and properly.  
Spare bulb can be obtained from  
authorized services.  
EN  
10  
 
Placing the refrigerator  
under the counter and  
adjusting the legs  
When you place your refrigerator, the  
distance between the product and the  
wall must be at least 10 cm, as seen in  
the figure.  
The air sucking channels must not be  
blocked so that the performance of  
your refrigerator does not decrease.  
(140 cm2)  
If your refrigerator is unstable;  
You may turn the front legs of your  
refrigerator as seen in the figure and  
make it stay balanced. The corner of  
the leg lowers when the leg is turned in  
the direction of the black arrow; it rises  
when the leg is turned in the opposite  
direction. It will be easier for you when  
you get some help from someone to  
lift the unit a little during this process.  
10 mm  
10 mm  
40 mm  
40 mm  
EN  
11  
 
REVERSING THE DOORS  
Follow the step by step instructions  
and the diagram below. Numbers in  
brackets refer to diagrams.  
1. Switch off at the socket outlet and  
pull out the mains plug.  
2. Remove all food, loose items and  
fittings from inside the appliance and  
door shelves.  
3. Unscrew the bolts and remove  
the upper and bottom hinges from the  
cabinet and door. (1) (2)  
4. Remove stoppers. (3) (4)  
5. Fit the stoppers on the opposite  
side. (5) (6)  
6. Reposition the upper hinge on the  
opposite side as bottom hinge (7)  
7. Reposition the bottom hinge on  
the opposite side as upper hinge. (8)  
Locate the door and tighten the bolts  
fixing the door.  
EN  
 
12  
1
1
3
2
2
4
5
8
8
6
7
7
EN  
 
13  
INSTALLATION INSTRUCTIONS - DETAILED STEP BY STEP  
598  
545  
595  
A (mm)  
B (mm)  
C (mm)  
813 - 863 mm  
820 - 870 mm  
100 - 150 mm  
NOTE  
1) Height of the product can be adjusted by the help of adjustable feet (front and back) to fit the furniture niche  
height (B).  
2) Do not operate this appliance until it has been installed in the furniture.  
EN  
 
14  
min.550  
min.550  
B
C
C=100-150 mm  
min. 600  
C
D
600  
C
D > 150 mm.  
EN  
 
15  
1
4
2
3
EN  
 
16  
E = 3 mm is recommended.  
Top view  
E
40 + A  
A
505  
E
5
6
Front view  
min. 4 mm  
Note:  
1. These dimensions are valid for products,which are hinged on right hand side.  
2. When door opening direction is reversed, mirror image of this instruction should be  
considered. That is, dimensions should be considered for opposite sides.  
EN  
 
17  
7
8
7
10  
11  
12  
13  
EN  
 
18  
16  
14  
15  
EN  
 
19  
4 Before operating  
Final Check  
Before you start using the freezer  
check that:  
1. The feet have been adjusted and  
the product is level.  
2. The interior is dry and air can  
circulate freely at the rear.  
3. Clean the interior as recommended  
under "CLEANING AND CARE."  
4. Insert the plug into the wall socket  
and switch on the electricity supply.  
Avoid accidental disconnection by  
taping over the switch.  
5. You will hear a noise as the  
compressor starts up. The liquid and  
gases sealed within the refrigeration  
system may also give rise to noise,  
whether the compressor is running or  
not which is quite normal.  
7. Front edges of the cabinet may feel  
warm. This is normal. These areas are  
designed to be warm to avoid  
condensation.  
9. Do not load the appliance  
immediately it is switched on. Wait  
until the correct storage temperature  
has been reached. We recommend  
that you check the temperature  
with an accurate thermometer (see;  
Temperature Control and Adjustment).  
EN  
 
20  
5 Using your refrigerator  
Temperature setting button  
The interior temperature of your  
refrigerator changes for the following  
Defrosting  
The larder fridge defrosts automatically.  
It is normal when ice particles form  
on the back wall during the operation.  
These do not need to be scratched  
or wiped out. Your refrigerator makes  
automatical defrost. Water formed  
after defrost flows into the evaporation  
container via the drain pipe through  
the water collecting chute, and here it  
evaporates automatically.  
reasons;  
• Seasonal temperatures,  
Frequent opening of the door and  
leaving the door open for long  
periods,  
Foods put into the refrigerator without  
decreasing the temperature to room  
temperature.  
The location of the refrigerator in the  
room (eg. exposing to sunlight)  
You may adjust the varying interior  
temperature using the thermostate. If  
the ambient temperature is higher than  
32°C, switch the thermostate button  
to maximum position.  
Check periodically whether the  
evaporation pipe is clogged and  
unclog it using the stick in the hole if  
necessary.  
EN  
21  
 
6 Maintenance and cleaning  
B We recommend that you unplug the  
Protection of plastic  
appliance before cleaning.  
C Never use any sharp abrasive  
instrument, soap, household  
cleaner, detergent and wax polish for  
cleaning.  
C Use luke warm water to clean the  
cabinet of your refrigerator and wipe it  
dry.  
C Use a damp cloth wrung out in  
a solution of one teaspoon of  
bicarbonate of soda to one pint of  
water to clean the interior and wipe it  
dry.  
surfaces  
C Do not put the liquid oils or oil-cooked  
meals in your refrigerator in unsealed  
containers as they damage the  
plastic surfaces of your refrigerator. In  
case of spilling or smearing oil on the  
plastic surfaces, clean and rinse the  
relevant part of the surface at once  
with warm water.  
B Make sure that no water enters the  
lamp housing and other electrical  
items.  
B If the larder refrigerator is not going  
to be used for a long period of time  
switch it off, remove all food, clean it  
and leave the door ajar.  
C Check door seals regularly to ensure  
they are clean and free from food  
particles.  
C To remove door racks, remove all the  
contents and then simply push the  
door rack upwards from the base.  
EN  
22  
 
7 Do's and Don'ts  
Do- Always choose high quality  
fresh food and be sure it is  
thoroughly clean before you freeze  
it.  
Do- Prepare fresh food for freezing  
in small portions to ensure rapid  
freezing.  
Do- Wrap all food in aluminium foil  
or freezer quality polythene bags  
and make sure any air is excluded.  
Do- Wrap frozen food when you  
buy it and put it in to the freezer as  
soon as possible.  
Do- Defrost food in the fridge  
compartment.  
Do- Remove ice cream from the  
freezer 10-20 minutes before  
serving.  
Don’t- Store bananas in your fridge  
compartment.  
Don’t- Store melon in your fridge.  
It can be chilled for short periods  
as long as it is wrapped to avoid it  
flavouring other food.  
Don’t- Store poisonous or any  
dangerous substances in your  
appliance. It has been designed  
for the storage of edible foodstuffs  
only.  
Don’t- Consume food which has  
been stored for an excessive time  
in the fridge.  
Don’t- Store cooked and fresh  
food together in the same  
container. They should be  
packaged and stored seperately.  
Don’t- Let defrosting food or food  
juices drip onto food.  
Don’t- Leave the door open for  
long periods as this will make the  
appliance more costly to run and  
cause excessive ice formation.  
EN  
Do- Clean your appliance regularly  
(See “Cleaning and Care”)  
Do- Keep raw meat and poultry  
below cooked food and dairy  
products.  
Do- Take off any unusable leaves  
on vegetables and wipe off any  
soil.  
Do- Leave lettuce, cabbage,  
parsley and cauliflower on the  
stem.  
Do- Wrap cheese firstly in  
greaseproof paper and then in a  
polythene bag excluding as much  
air as possible. For best results  
take out of the fridge compartment  
an hour before eating.  
Do- Wrap raw meat and poultry  
loosely in polythene or aluminium  
foil. This prevents drying.  
Do- Wrap fish and offal in  
polythene bags.  
Do- Wrap food which have a  
strong odour or can dry out in  
polythene bags, aluminium foil or  
place in an airtight container.  
Do- Wrap bread well to keep it  
fresh.  
Do- Chill white wines, beer, lager  
and mineral water before serving.  
Do- Check contents of the freezer  
every so often.  
Do- Keep food for as short a time  
as possible and adhere to “Best  
Before”, “Use by” etc. dates.  
Do- Store commercially frozen  
food in accordance with the  
instructions given on the packets  
that you buy.  
23  
 
Don’t- Put hot food into the  
appliance. Let it cool down first.  
Don’t- Put liquid-filled bottles or  
sealed cans containing carbonated  
liquids into the freezer as they may  
burst.  
Don’t- Exceed the maximum  
freezing loads (6 kg in any 24  
hours) when freezing fresh food.  
Don’t- Give children ice-cream and  
water ices direct from the freezer.  
The low temperature may cause  
‘freezer burns’ on lips.  
PROBLEM SOLVING  
If the appliance does not operate when  
switched on, check whether:  
• The plug is inserted properly in the  
socket and that the power supply is  
on. (To check the power supply to the  
socket, plug in another appliance)  
• The fuse has blown/circuit breaker  
has tripped/main distribution switch  
has been turned off.  
• The temperature control has been  
set correctly and not to “0” (OFF)  
• New plug is wired correctly if you  
have changed the fitted moulded plug.  
If the appliance is still not operating  
after the above checks, please refer  
to the section on “How To Obtain  
Service”.  
Don’t- Freeze fizzy drinks.  
Don’t- Try to keep frozen food  
which has thawed, it should be  
eaten within 24 hours or cooked  
and refrozen.  
Don’t- Remove items from the  
freezer with wet hands.  
Don’t- Close the freezer door  
before placing the compartment  
cover in its place.  
Please ensure that above checks have  
been made as a charge will be made if  
no fault is found.  
Don’t- Leave frozen food at room  
temperature to thaw; the best way  
to defrost food is to put it in the  
fridge to thaw slowly. Make sure  
you avoid defrosting food or food  
juices drip onto other food.  
EN  
24  
 
8 How To Obtain Service  
Please keep your purchase receipt or other proof of purchase in a safe place;  
you will need to have it should the product require attention under guarantee.  
You should also complete the details below; it will help us assist you when  
requesting service. (The model number is printed on the Instruction Booklet and  
the serial number is printed on the Rating Label affixed to the appliance)  
Model No:  
Serial No:  
Retailer:  
Date of purchase:  
For service under guarantee simply telephone the appropriate number  
below  
UK Mainland & Northern Ireland  
Fridges & Freezers  
Electric Cookers  
Gas & Dual Fuel Cookers  
Washing Machines & Dishwashers  
0845 6046859  
0845 6046859  
0845 6046859  
0845 6046859  
Republic of Ireland  
All Refrigeration, All Cookers  
01 862 3411  
Washing Machines & Dishwashers  
Before requesting service please check the trouble-shooting guide in the  
Operating Instructions as a charge may be levied where no fault is found even  
though your product may still be under guarantee.  
EN  
 
25  
9 Guarantee Details  
Your new BLOMBERG product is guaranteed against the cost of breakdown  
repairs for three years from the date of the original purchase.  
What is covered?  
• Repairs necessary as a result of faulty materials, defective components or  
manufacturing defect.  
• The cost of functional replacement parts, but excluding consumable items.  
• The labour costs of a BLOMBERG approved repairer to carry out the repair.  
What is not covered?  
Transit, delivery or accidental damage or misuse and abuse.  
• Cabinet or appearance parts, including knobs, flaps, handles or container lids.  
• Accessories or consumable items including but not limited to, ice trays, scrapers,  
cutlery baskets, filters and light bulbs.  
• Repairs required as a result of unauthorised repair or inexpert installation that fails to  
meet the requirements contained in the user instruction book.  
• Repairs to products used on commercial or non-residential household premises.  
• Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often  
included within your household contents insurance policy, or may be available  
separately from your retailer).  
Important notes.  
Your BLOMBERG product is designed and built for domestic household use only.  
• The guarantee will be void if the product is installed or used in commercial or non-  
residential domestic household premises.  
• The product must be correctly installed, located and operated in accordance with  
the instructions contained in the User Instructions Booklet provided.  
• Professional installation by a qualified Electrical Domestic Appliance Installer is  
recommended for all Washing Machines, Dishwashers and Electric Cookers  
• Gas Cookers must only be installed by a Gas Safe (or BORD GAIS) registered Gas  
Installer.  
• The guarantee is given only within the boundaries of the United Kingdom and the  
Republic of Ireland.  
• The guarantee is applicable only to new products and is not transferable if the  
product is resold.  
•BLOMBERG disclaims any liability for incidental or consequential damages.  
The guarantee does not in anyway diminish your statutory or legal rights.  
EN  
 
26  
Blomberg, 36-38 Caxton Way, Watford, Hertfordshire, WD18 8UF  
Tel: 0845 6048340 Fax: 0845 6004922  
57 0192 0000/AD  
 

Beko Washer ECO WMB 81445 LW User Manual
BenQ Projector MP770 User Manual
Black Box Network Hardware 8 port 10 100base tx hardened ethernet extender switch User Manual
Black Box TV Cables IEEE 8023 User Manual
Black Decker Automobile Accessories T2707S User Manual
Bosch Power Tools Saw 1590EVSK User Manual
Bowers Wilkins Speaker DM320 User Manual
Bravetti Fryer K4320H User Manual
Canon Photo Printer i470D User Manual
Chicago Electric Cordless Drill 95848 User Manual