Blomberg Clothes Dryer TKF 8439 A User Manual

TKF 8439 A  
Dryer  
 
TABLE OF CONTENTS  
1 Your Dryer  
Overview .............................................4  
Technical Specifications.......................5  
4
table..................................................18  
Programme table...............................18  
Auxiliary function................................19  
Drying degree ..................................19  
Anti-creasing ...................................19  
Changing the contrast .......................19  
Warning indicators.............................19  
Changing the delay time....................20  
Canceling the time delay....................20  
Starting the programme.....................20  
Progress of programme.....................20  
Changing the programme after it has  
started...............................................21  
Child-proof lock.................................21  
Finishing by canceling the programme2 1  
End of programme ............................22  
2 Important safety instructions6  
General safety .....................................6  
Intended use .......................................7  
Childrens safety ..................................7  
3 Installation  
Appropriate installation location ...........8  
Removing the transportation safety  
8
assembly.............................................8  
Under counter installation ....................8  
Mounting over a washing machine.......8  
Connection to water drain; ..................9  
Adjusting the feet.................................9  
First use ..............................................9  
Disposing of packaging material ..........9  
Transportation of the machine .............9  
Disposing of the old machine.............10  
7 Maintenance and cleaning 23  
Filter Cartridge / Door Inner Surface...23  
Sensor ..............................................23  
Water tank;........................................23  
For the condenser ............................24  
4 Electrical Connection  
11  
8 Suggested solutions for  
Attention!...........................................11  
Electrical requirements.......................11  
Fitting a different plug .......................11  
Washer/dryer combination.................11  
problems  
25  
26  
27  
9 Guarantee  
10 Service  
5 Initial preparations for drying12  
Things to be done for energy saving ..12  
Laundry suitable for drying in the  
machine ............................................12  
Laundry unsuitable for drying in the  
machine ............................................12  
Preparing laundry for drying...............13  
Correct load capacity ........................13  
6 Selecting a Programme and  
OperatingYour Machine  
15  
Control panel.....................................15  
Preparing the machine.......................16  
Programme selection.........................16  
Time display ......................................17  
Programme selection and consumption  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
3
1 Your Dryer  
Overview  
6
1
5
4
3
2
1- Control panel  
2- Adjustable feet  
4-Rating plate  
5- Fluff filter  
6- Power cord  
3-Kick plate  
Download from Www.Somanuals.c4om. All Manuals Search And Download.  
EN  
Technical Specifications  
EN  
2
Height (adjustable)  
Width  
84,6 cm  
59,5 cm  
59,8 cm  
8 kg  
Depth  
Capacity (max.)  
Weight (net)  
Voltage  
38 kg  
Rated power input  
Model code  
See rating plate  
Type label is located behind the loading door.  
Specifications of this appliance may change without notice to improve the quality of the  
product. Figures in this manual are schematic and may not match your product exactly.  
Values stated on the machine labels or in the documentation accompanying it are  
obtained in laboratory in accordance with the relevant standards. Depending on  
operational and environmental conditions of the appliance, values may vary.  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
5
2 Important safety instructions  
This section includes safety information  
that will help protection from risks of  
personal injuries or materialistic damages.  
or adaptors to connect the dryer to  
power supply in order to decrease the  
risk of electric shock.  
Failure to follow these instructions  
shall cause any warranty and reliability  
commitment to become void.  
General safety  
• Do not make any changes on the plug  
supplied with the product. If it is not  
compatible with the socket, have a  
qualified electrician change the socket  
with a suitable one.  
• Items cleaned or washed with gasoil/  
fuel oil, dry-laundry solvents and other  
combustible or explosive materials as  
well as the items that are contaminated  
or spotted with such materials should  
not be dried in the product since they  
emit flammable or explosive vapor.  
• Do not dry items cleaned with industrial  
chemicals in the dryer.  
• Do not dry unwashed items in the dryer.  
• Items soiled with cooking oils,  
acetone, alcohol, fuel oil, kerosene,  
stain remover, turpentine, paraffin and  
paraffin removers must be washed  
in hot water with plenty of detergent  
before being dried in the dryer.  
• Garments or pillows bolstered with  
rubber foam (latex foam), shower  
bonnets, water resistant textiles,  
materials with rubber reinforcement and  
rubber foam pads should not be dried  
in the dryer.  
• Do not use fabric softeners and  
anti-static products unless they are  
recommended by the manufacturers of  
the fabric softener or the product.  
• This product must be earthed.  
Grounding installation decreases the  
risk of electric shock by opening a path  
with low resistance for the electricity  
flow in case of a malfunction or failure.  
Power cable of this product is equipped  
with a conductor and a grounding  
plug that allows for grounding the  
product. This plug must be installed  
appropriately and inserted into a socket  
which is grounded in accordance with  
the local laws and regulations.  
• Never place the machine on a carpet-  
covered floor, otherwise, lack of airflow  
beneath the machine may cause  
electrical parts to overheat. This will  
cause problems with your machine.  
• If the power cable or mains plug is  
damaged, you must call Authorised  
Service Agent for repair.  
• The product should not be plugged  
in during installation, maintenance  
and repair works. Such works should  
always be made by the technical  
service. Manufacturer shall not be held  
responsible for damages arising from  
processes carried out by unauthorised  
persons.  
• Connect the product to a grounded  
outlet protected by a fuse of suitable  
capacity as stated in the technical  
specifications table.  
• Operate your product at temperatures  
between +5°C and +35°C.  
• Do not use electrical devices in the  
product.  
• Do not connect the air exit of the  
product to the chimney holes which  
are used for the exhaust fumes of the  
devices operating with gas or other  
types of fuel.  
You must provide enough ventilation  
in order to prevent gases exiting from  
devices operating with other types of  
fuels including the naked flame from  
accumulating in the room due to the  
back fire effect.  
• Always clean the lint filter before or after  
each loading.  
• Never operate your dryer without the  
lint filter installed.  
• Do not install the product behind a door  
with a lock, sliding door or a door that  
has a hinge against the hinge of the  
dryer.  
• Do not install or leave this product  
in places where it will be exposed to  
• Do not allow fibre, dust and dirt  
accumulation around the exhaust exit  
and at adjacent areas.  
• Power cable plug must be within easy  
reach after installation.  
• Do not use extension cords, multi-plugs  
Download from Www.Somanuals.c6om. All Manuals Search And Download.  
EN  
outdoor conditions.  
• Underwear that contains metal  
reinforcements should not be placed in  
a dryer. Damage to the dryer can result  
if metal reinforcements come loose  
during drying.  
• Do not tamper with the controls.  
• Do not perform any repair or part  
replacing procedures on the product  
even if you know or have the ability to  
perform unless it is clearly suggested  
in the operating instructions or the  
published service manual.  
• Check all garments for forgotten  
lighters, coins, metal pieces, needles,  
etc. before loading.  
• Inside and exhaust duct of the product  
must be cleaned by the qualified  
service personnel periodically.  
• Wrong connection of grounding  
conductor of the product can cause  
electric shock. If you have any suspect  
about the grounding connection, have  
it checked by a qualified electrician,  
service representative or service  
personnel.  
• Do not reach into the machine when  
the drum is spinning.  
• Unplug the machine when it is not in  
use.  
• Never wash down the appliance with  
water! There is the risk of electric shock!  
Always disconnect by unplugging from  
the mains before cleaning.  
At times when your dryer is not in  
use or after the laundry is taken out  
following the completion of drying  
process, turn off by using the On/  
Off button. In cases when the On/  
Off button is on (while the dryer is  
energized), keep the door of the dryer  
closed.  
Intended use  
• This product has been designed for  
domestic use. It should not be used for  
other purposes.  
• Use the product only for drying laundry  
that are marked accordingly.  
• Dry only those articles in your product  
that are stated in this manual.  
• This product is not intended to be  
used by persons with physical, sensory  
or mental disorders or unlearned  
or inexperienced people (including  
children) unless they are attended by  
a person who will be responsible for  
their safety or who will instruct them  
accordingly for use of the product.  
Children’s safety  
• Never touch the plug with wet hands.  
Never unplug by pulling on the cable,  
always pull out by grabbing the plug  
only. Do not operate the machine if the  
power cable or plug is damaged!  
• Never attempt to repair the machine  
yourself, otherwise, you will be putting  
your life and others’ lives in danger.  
• For malfunctions that cannot be solved  
by following the information given in the  
safety instructions:  
• Electrical appliances are dangerous for  
the children. Keep children away from  
the machine when it is operating. Do  
not let them tamper with the machine.  
• Packaging materials are dangerous to  
children. Keep the packaging materials  
out of reach of children or dispose  
them by classifying according to waste  
directives.  
Turn off the machine and contact an  
authorised service agent.  
• Do not stop the dryer before the drying  
cycle comes to an end unless you will  
remove all laundry from the dryer fast  
in order to lay them and dissipate the  
heat.  
• Do not allow children sit/climb on or  
enter in the product.  
• Remove the door of the drying  
compartment before decommissioning  
or disposing of the product.  
• Children should be supervised to  
ensure that they do not play with the  
product.  
• The final step of the drying cycle (cool-  
down cycle) occurs without applying  
heat to ensure that the items are left  
at a temperature that will not damage  
them.  
• Close the loading door when you leave  
the area where the product is located.  
• Fabric softeners or similar products  
should be used as specified by the  
fabric softener instructions.  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
7
3 Installation  
Refer to the nearest Authorised Service  
Agent for installation of your product.  
C Preparation of location and electrical  
installation for the product is under  
customers responsibility.  
BInstallation and electrical connections  
must be carried out by a qualified  
personnel.  
A Prior to installation, visually check if the  
product has any defects on it. If so, do  
not have it installed. Damaged products  
will cause risks for your safety.  
Appropriate installation location  
• Install the product in an environment  
which has no risk of freezing and is in a  
stable and level position.  
AMake sure that you have removed  
the transportation safety assembly  
(nylon+styrofoam pieces) before using  
the product for the first time. Do not  
leave any items inside the drum.  
• Operate your product in a well  
ventilated, dust-free environment.  
• Do not block the air ducts in front of  
and under the product with materials  
such as long pile rugs and wooden  
bands.  
Under counter installation  
• It should never be operated without the  
top trim.  
• Leave at least 3 cm of space between  
the side and rear walls of the product  
and the walls of the counter/cupboard  
when installing your product under a  
counter or in a cupboard.  
Mounting over a washing machine  
• A fitting device should be used between  
the two machines when installing above  
a washing machine. The bracket must  
be installed by the Authorised Service  
Agent.  
• Place the product on a firm floor. If  
it will be placed on top of a washing  
machine, the approximate weight of  
both machines may reach 180 kg when  
they are full. Therefore, the floor must be  
capable of carrying the load on it!  
• The bracket can be supplied from the  
Authorised Service Agent.  
Connection to water drain;  
In products equipped with a condenser unit  
the water accumulated during the drying  
cycle is collected in the water tank. You  
should drain the accumulated water after  
each washing cycle.  
You can directly send the accumulated  
water out through the water drain hose  
supplied with the machine instead of  
periodically draining the water collected in  
the water tank.  
• Do not place your product on a long  
pile rug or on similar surfaces.  
• Do not install the product behind a door  
with a lock, sliding door or a hinged  
door which can strike the product.  
• Once the product is installed, it should  
stay at the same place where its  
connections have been made. When  
installing the product, make sure  
that the rear wall of it does not touch  
anywhere (tap, socket, etc.) and also  
pay attention to install the product at a  
place where it will stay permanently.  
B Do not place the product on top of the  
power cable.  
• Keep at least 1.5 cm distance to walls  
of other furniture.  
Removing the transportation  
safety assembly  
ARemove the transportation safety  
assembly before using the product for  
the first time.  
1. Open the loading door.  
2. There is a nylon bag inside the drum  
that contains a piece of styrofoam. Hold  
it from its section marked with XX.  
3. Pull the nylon towards yourself and  
remove the transportation safety  
assembly.  
Download from Www.Somanuals.c8om. All Manuals Search And Download.  
EN  
Connecting the water drain hose;  
Adjusting the feet  
In order to ensure that your machine  
operates more silently and vibration-free, it  
must stand level and balanced on its feet.  
Balance the machine by adjusting the feet.  
Rotate the feet to adjust until the machine  
stands level and firmly.  
C Never unscrew the adjustable feet from  
their housings.  
First use  
1. Remove the hose on the machine by  
pulling it out from its end. Do not use  
any tools to take out the hose.  
2. Connect the special drain hose supplied  
with the machine to the pipe fitting.  
3. The other end of the drain hose can be  
directly connected to the wastewater  
drain or to the washbasin. The fitting  
must always be secured in all types of  
connections. Your house may be flooded  
if the hose gets out of its housing during  
water discharge.  
To have the product ready for operation  
before calling the authorised service  
agent, make sure that its location  
and power supply installations are  
appropriate. If they are not, call a  
qualified electrician to have any  
necessary arrangements carried out.  
• Make sure that the power connections  
of the product are in accordance  
with the instructions given in relevant  
chapters of this manual.  
Disposing of packaging material  
Packaging materials are dangerous to  
children. Keep packaging materials in  
a safe place out of reach of children.  
Packaging materials of your product are  
manufactured from recyclable materials.  
Sort and dispose of them in accordance  
with recycled waste instructions. Do not  
dispose of them with normal domestic  
waste.  
Important:  
• The hose should be attached to a height  
of maximum 80 cm.  
You must be careful not the pinch or  
bend the hose.  
• The end of the hose should not be bent,  
it should not be stepped on and it must  
not be folded between the drain and the  
machine.  
Transportation of the machine  
1. Unplug the machine from the mains.  
2. Remove the water drain (if any) and  
other connections.  
3. Drain water remained in the machine  
completely before transportation.  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
9
Disposing of the old machine  
Dispose of your old machine in an  
environmentally friendly manner.  
Refer to your local dealer or solid waste  
collection centre in your area to learn how  
to dispose of your machine.  
Before disposing of your old machine,  
cut off the power cable plug and make  
the loading door lock unusable to avoid  
dangerous conditions to children.  
Download from Www.Somanuals1.c0om. All Manuals Search And Download.  
EN  
4 Electrical Connection  
worktop.  
Make sure that you have an earthed  
power outlet socket rated at 13 amps  
(minimum).  
A Undercounter installation without the  
top cover must only be carried out by an  
authorised agent.Risk of electric shock.  
A Important  
Attention!  
If you use your dryer as built-in,  
the socket must be reachable after  
installation, or a separate switch (which  
can disconnect the two poles) must  
be used in the installation. Check for  
suitability.  
Fitting a different plug  
As the colours of the wires in the mains  
lead of this appliance may not correspond  
with the coloured markings identifying  
the terminals on your plug, proceed as  
follows:  
For a permanent connection, a master  
switch with at least 3mm contact  
clearance and minumum 13 A rating  
must be used.  
1 Connect the green - yellow or green  
(earth) wire to the terminal in the plug  
marked ‘E’ or with the symbol or  
coloured green and yellow or green.  
2 Connect the blue (neutral) wire to  
the terminal in the plug marked ‘N’ or  
coloured black.  
3 Connect the brown (live) wire to  
the terminal in the plug marked ‘L’ or  
coloured red.  
With the alternative plugs a 13A fuse  
must be fitted either in the plug or  
adaptor or in the main fuse box. If in  
doubt contact a qualified electrician.  
Electrical requirements  
Before you insert the plug into the wall  
socket make sure that the voltage and  
the frequency shown in the rating label  
corresponds to your electricity supply.  
We recommend that this appliance be  
connected to the mains supply via a  
suitable switched and fused socket in a  
readily accessible position.  
Should the mains lead of the appliance  
become damaged or need replacing at  
any time, it must be replaced by a special  
purpose made mains lead which can only  
be obtained from a Authorised Service  
Agent.  
Green and yellow  
or green  
A Warning  
This appliance must be earthed  
If the fitted moulded plug is not suitable  
for your socket, then the plug should be  
cut off and an appropriate plug fitted.  
The moulded plug on this appliance  
incorporates a 13A fuse. Should the fuse  
need to be replaced an ASTA approved  
BS1362 fuse of the same rating must  
be used. Do not forget to refit the fuse  
cover. In the event of losing the fuse  
cover, the plug must not be used until a  
replacement fuse cover has been fitted.  
Colour of the replacement fuse cover  
must be the same colour as that visible  
on the pin face of the plug. Fuse covers  
are available from any good electrical  
store.  
N
L
Blue or black  
Brown or red  
Washer/dryer combination  
Do not stack washing machine on top  
of the tumble dryer. This would damage  
both appliances and guarantees would  
become void. It is also unsafe to stack  
an appliance on top of another without  
using a suitable and approved stacking  
kit obtained from the manufacturer of the  
appliances.  
In order to avoid hazards, damaged  
supply cord should be replaced by the  
manufacturer, its service agent or similarly  
• A special stacking kit is required as an  
optional extra please contact customer  
service.  
qualified people.  
Built-under installation  
This appliance can be installed under a  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
11  
5 Initial preparations for drying  
Things to be done for energy  
saving:  
• Make sure that you operate the product  
at its full capacity but pay attention to  
not exceeding it.  
A B C D  
Low  
• Spin your laundry at the highest speed  
possible when washing them. Thus,  
the drying time is shortened and energy  
consumption is decreased.  
l n m  
o p q  
• Pay attention to dry same types of  
laundry together.  
• Follow the instructions in the user  
manual for programme selection.  
• Make sure that sufficient clearance  
is provided at the front and rear side  
of the dryer for air circulation. Do not  
block the grill at the front side of the  
product.  
• Do not open the door of the machine  
during drying unless necessary. If you  
Laundry unsuitable for drying in  
the machine  
must certainly open the door, pay  
attention not to keep it open for a long  
time.  
• Laundry items with metal attachments  
such as belt buckles and metal buttons  
can damage your dryer.  
• Do not add new (wet) laundry during  
drying.  
• Do not dry items such as woollens, silk  
garments and nylon stockings, delicate  
embroidered fabrics, laundry with metal  
accessories and items such as sleeping  
bags in the dryer.  
• Lint and fibres released from the  
laundry to the air during the drying  
cycle are collected in the “Lint Filter”.  
Make sure that you clean the filters  
before or after each drying.  
• Laundry made of delicate and valuable  
fabrics as well as lace curtains can be  
creased. Do not dry them in the dryer!  
• Do not dry items made of hermetic  
fibres such as pillows and quilts in the  
dryer.  
• Laundry made of foam or rubber will be  
deformed.  
• Do not dry laundry containing rubber in  
the dryer.  
• Do not dry laundry exposed to  
petroleum, oil, combustible or explosive  
agents in the dryer even if they are  
washed beforehand.  
• Overly wet laundry or laundry with  
dripping water must not be put into the  
dryer.  
• Items cleaned or washed with gasoil/  
fuel oil, dry-laundry solvents and other  
combustible or explosive materials as  
well as the items that are contaminated  
or spotted with such materials should  
not be dried in the product since they  
• In models with condenser, make sure  
that you clean the condenser regularly  
at least once every month or after every  
30 drying cycles.  
• In vented models, follow the vent hose  
connection rules in the user manual  
and pay attention to the vent hose  
cleaning.  
• Ventilate the room, where the dryer is  
located, well during drying.  
• For power saving in models with lamps,  
at times when your dryer is not in  
use, keep the door closed if the On/  
Off button is pressed (if the dryer is  
energized).  
Laundry suitable for drying in the  
machine  
C Always follow the suggestions on the  
laundry labels. Dry only the laundry  
having a label stating that they are  
suitable for drying in a dryer and make  
sure that you select the appropriate  
programme.  
Download from Www.Somanuals1.c2om. All Manuals Search And Download.  
EN  
emit flammable or explosive vapor.  
• Do not dry items cleaned with industrial  
chemicals in the dryer.  
• Do not dry your unwashed laundry in the  
dryer.  
Correct load capacity  
• Items soiled with cooking oils, acetone,  
alcohol, fuel oil, kerosene, stain remover,  
turpentine, paraffin and paraffin removers  
must be washed in hot water with plenty  
of detergent before being dried in the  
dryer.  
• Garments or pillows bolstered with  
rubber foam (latex foam), shower  
bonnets, water resistant textiles,  
materials with rubber reinforcement and  
rubber foam pads should not be dried in  
the dryer.  
• Do not use fabric softeners and  
anti-static products unless they are  
recommended by the manufacturers of  
the fabric softener or the product.  
• Do not dry the underwear reinforced with  
metal parts in the dryer. If these metal  
reinforcements loosen and break during  
drying, they will damage your dryer.  
Preparing laundry for drying  
• Check all laundry items before loading  
them into the product to make sure that  
there are no lighters, coins, metal items,  
needles and etc. in their pockets or on  
any part of them.  
A Consider the information in the  
“Programme Selection Table”. Always  
start the programme in accordance  
with the maximum load capacity.  
C Adding laundry to the machine more  
than the level shown in the figure is not  
recommended. Drying performance  
will degrade when the machine is  
overloaded. Furthermore, your dryer  
and your laundry can be damaged.  
C Place your laundry into the drum  
loosely so that they will not get tangled.  
• Fabric softeners and similar products  
must be used in accordance with the  
instructions of the manufacturer of the  
relevant products.  
• All laundry must be spun at the highest  
spin speed that your washing machine  
allows for the laundry type.  
• Laundry may be tangled after washing.  
Separate your laundry before placing  
them into your dryer.  
• Sort your laundry according to their types  
and thicknesses. Dry the same type of  
laundry together. E.g.: fine kitchen towels  
and table cloths dry faster than the thick  
bath towels.  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
13  
Following weights are given as examples.  
Approximate  
Home articles  
weights (g)  
Cotton quit covers  
(double)  
1500  
Cotton quit covers (single)  
Bed sheets (double)  
Bed sheets (single)  
Large tablecloths  
Small tablecloths  
Tea napkins  
1000  
500  
350  
700  
250  
100  
700  
350  
Bath towels  
Hand towels  
Approximate  
weights (g)  
Garments  
Blouses  
Cotton shirts  
Shirts  
Cotton dresses  
Dresses  
Jeans  
150  
300  
200  
500  
350  
700  
100  
125  
Handkerchiefs (10 pieces)  
T-Shirts  
Loading  
• Open the loading door.  
• Place laundry items loosely into the  
dryer.  
• Push the loading door to close. Ensure  
that no items are caught in the door.  
Download from Www.Somanuals1.c4om. All Manuals Search And Download.  
EN  
6 Selecting a Programme and OperatingYour Machine  
Control panel  
4
1
2
3
5
9
8
7
6
1. Washing machine spin speed*/Timer pro-  
gramme selection  
5. On/Off button  
Used to turn on and off the machine.  
Spin speed used to spin the laundry in the  
washing macthine / Indicates the time for  
timer programs.  
6. Anti-creasing  
Prevents the laundry from creasing after the  
machine completes its programme.  
7. Dryness level  
2. Display  
Indicates the status of the machine.  
3. Start/Pause/Cancel button  
Used to start, pause or cancel the  
programme.  
Used to adjust the required dryness level.  
8. Cancel audio warning  
Used to cancel the audio warning given at  
the end of the programme.  
4. Programme selection knob  
Used to select a programme.  
9.Time delaying buttons  
Used to set the time delay.  
Child-proof lock warning icon  
Time delaying mode  
Spin speed / Timer programmes  
Operation icon  
Door open warning icon  
Anti-creasing mode  
Pause icon  
Water tank full warning icon  
Filter cleaning warning icon  
Condenser cleaning warning icon  
Remaining time indicator  
Audio warning level / Cancel audio warning  
Drying degree  
Anti-creasing is activated  
Spin speed is used to show the remaining time more accurately.  
It does not affect the performance of your machine.  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
15  
synthetic/cotton blended laundry, etc.).  
C Do not dry curtains and lace in your  
machine.  
Preparing the machine  
1. Plug in your machine.  
2. Place the laundry in the machine.  
3. Press the “On/Off” button.  
C Pressing the “On/Off” button does not  
necessarily mean that the programme  
has started. Press “Start/Pause/  
Cancel” button of the machine to start  
the programme.  
Special programmes  
For special cases, there are also extra  
programmes available:  
C Additional programmes may differ  
according to the model of your  
machine.  
•Mini 35’  
Programme selection  
You can use this programme to dry your  
cotton laundry that you have spun at  
high speeds in your washing machine. 2.  
This program dries 2 kg cotton laundry (2  
Shirts / 5 T-shirts) in 35 minutes.  
Decide the appropriate programme from  
the table below which includes drying  
temperatures in degrees. Select the  
desired programme with the programme  
selection knob.  
C To obtain better results from your  
dryer, your laundry must be washed  
at suitable programmes and spun at  
the recommended spin speeds in the  
washing machine.  
Drying at high  
temperature only for  
cotton laundry. Thick  
and multi layered  
Extra dry  
laundry (E.g.: towels,  
linens, jeans) are dried  
in a way that they do  
not require ironing  
before placing in the  
wardrobe.  
Normal laundry (E.g.:  
tablecloths, underwear)  
are dried in a way that  
they do not require  
ironing before placing  
in the wardrobe.  
•Shirts  
This programme dries the shirts more  
sensitively and creases them less and  
thus, helps to iron them more easily.  
C There may be a little humidity on your  
shirts at the end of the programme. We  
recommend you not to leave the shirts  
in the dryer.  
•Jeans  
Wardrobe dry  
Iron dry  
You can use this programme to dry your  
jeans that you have spun at high speeds  
in your washing machine.  
C Review the relevant section in the  
programme table.  
Normal laundry (E.g.,  
Shirts, dresses) are  
dried ready to be  
ironed.  
•Mix  
Used to dry synthetic and cotton laundry  
that do not release colour. Used for  
laundry that is suitable for drying.  
•Sportswear  
C For further programme details, see,  
"Programme Selection Table"  
Used to dry the laundry that are made  
of synthetic, cotton or mixed fabrics and  
have a tag indicating that they are suitable  
for drying.  
Main programmes  
Depending on the type of laundry, the  
following main programmes are available:  
•Cottons  
•Wool Refresh  
You can dry your durable laundry with this  
programme. Dries at high temperature. It  
is recommended to use for your cotton  
items (such as bed sheets, quilt cover,  
underclothing, etc.).  
You can use this function to ventilate  
and soften your woolen laundry that can  
be washed in the washing machine. Do  
not use this function to dry your laundry  
completely. Take out your laundry and  
ventilate them immediately after the  
program is over.  
•Synthetics  
You can dry your less durable laundry  
with this programme. It dries at a lower  
temperature compared to the cottons  
programme. It is recommended for your  
synthetic laundry (such as shirts, blouses,  
•Shirt 15’  
You can use this feature to make 2 shirts  
ready for ironing in 15 minutes.  
Download from Www.Somanuals1.c6om. All Manuals Search And Download.  
EN  
•Lingerie  
Time display  
Suitable to dry the 100% synthetic or  
synthetic-mixture satin type underwear  
(night gown, garments for upper body,  
pajamas) with the word dryable in the  
washing instructions.  
The display shows the time remaining  
for the programme to complete while a  
programme is running. Time is displayed  
in hours and minutes as “02:30”. The  
example display image shows the dryer  
when it is running and child-proof lock is  
active.  
C Products with a high accessory con-  
tent such as lace, veil, stone, beads  
and wires and products with a high  
content of silk should not be dried.  
The silk laundry with cotton content or  
satin look may remain wet when dried  
with this program.  
CProgramme duration may differ from the  
values in the consumption table subject  
to the changes in the water hardness  
and temperature, ambient temperature,  
type and amount of laundry, auxiliary  
functions selected, and changes in the  
supply voltage..  
The level of dryness may depend on the  
mixture of the cloth, type of knitting and  
the humidity content.  
•Viscose  
You can dry your Viscose laundry that  
is marked that it can be dried in tumble  
dryer(dresses, shirts, underwear, etc…).  
Viscose/polymer, viscose/cotton mixed  
laundry is also suitable for this program.  
C It is not recommended to dry laundry  
that has accessory of pile textile, lace,  
small stones etc… Drying level can be  
changeable according to the type and  
mixture of laundry.  
•Refresh  
Only ventilation is performed for 10  
minutes without blowing hot air. You can  
air your clothes that have been kept at  
closed environments for a long time and  
deodourise unpleasant odours thanks to  
this programme.  
•Timer programmes  
You can select one of the 10 min., 20  
min., 30 min., 40 min., 50 min., 60 min.,  
80 min., 100 min., 120 min., 140 min.  
and 160 min. timer programmes to  
achieve the desired final drying level at  
low temperatures. Programme dries at  
the selected time regardless of the drying  
temperature.  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
17  
Programme selection and consumption table  
Programme table  
EN  
2
Approximate  
amount of  
remaining  
humidity  
Drying time  
(minutes)  
Spin speed in washing  
machine (rpm)  
Programmes  
Capacity (kg)  
Cottons / Coloreds  
Extra dry  
8
8
1000  
1000  
1000  
1200  
1200  
1200  
1200  
1000  
1000  
600  
% 60  
% 60  
% 60  
%50  
%50  
%50  
%60  
%60  
%60  
%100  
%40  
%50  
147  
137  
105  
35  
A
A
A
Cupboard dry  
Iron dry  
8
Mini 35'  
Shirts  
2
1.5  
4
40  
Jeans  
80  
Shirt 15'  
Mix  
0.5  
4
15  
83  
Sportswear  
Viscose  
Lingerie  
Wool Refresh  
4
92  
1.5  
1
100  
50  
800  
1.5  
600  
6
Synthetics  
Cupboard dry  
4
800  
% 40  
53  
B
Energy consumption values  
Approximate  
Spin speed in washing amount of  
Energy  
consumption  
value kWh  
Programmes  
Capacity (kg)  
machine (rpm)  
remaining  
humidity  
Cottons linen cupboard dry*  
Cottons Ready to iron  
8
8
4
1000  
1000  
800  
% 60  
% 60  
% 40  
4.71  
3.80  
1.80  
Synthetics cupboard dry  
* : Energy Label standard programme (EN 61121:2012)  
All values given in the table have been fixed according to EN 61121:2012 Standard.  
These values may deviate from the table according to the laundry type, laundry spin  
speed, environmental conditions and voltage fluctuations.  
Download from Www.Somanuals1.c8om. All Manuals Search And Download.  
EN  
Auxiliary function  
Changing the contrast  
Audio Warning  
Contrast can be adjusted in order to  
make the symbols on the display appear  
clearer. It may particularly be necessary to  
change the contrast setting of the display  
when the dryer is installed over a washing  
machine.  
Cancel  
audio warning  
Audio warning Audio warning  
level 1 level 2  
Audio warning  
level 3  
Your dryer will give an audio warning when  
the programme comes to an end. If you  
do not want to hear this buzzing or want  
to change the volume level, you need to  
press the “Volume level” button. No audio  
warning will be given when “x” appears on  
the screen.  
Press and hold the Spin Speed/Time  
button for 3 seconds.  
When the contrast is changed at the end  
of 3 seconds, all symbols on the display  
will become visible for 3 seconds in order  
to indicate that the process is complete.  
Perform the same procedure to revert back to  
the previous contrast setting.  
C You can select this function either  
before or after the programme starts.  
Warning indicators  
Drying degree  
C Warning indicators may differ according  
to the model of your machine.  
Filter cleaning  
Used to adjust the required dryness level.  
More drying is performed compared to  
the default settings when “+” sign appears  
and less drying is performed when “-” sign  
appears. Programme duration can change A warning symbol will appear to remind  
depending on the selection.  
A This function must be selected before  
the programme starts.  
filter cleaning after the programme finishes.  
C f the filter cleaning symbol flashes  
continuously, please refer to  
“Suggested solutions for problems”.  
Water tank  
Anti-creasing  
A warning symbol will turn on at the end  
of the programme or when the tank is full  
with water. The machine stops operating  
if the warning symbol turns on when a  
programme is running. To restart the  
machine, please drain the water in the  
water tank. Press “Start/Pause/Cancel”  
button to start the programme after you  
have emptied the water tank. The warning  
symbol turns off and the programme  
resumes operating.  
A 2-hour anti creasing programme to  
prevent laundry from creasing will be  
activated if you do not take the laundry  
out after the programme is over. This  
programme rotates the laundry in  
600-second intervals to prevent creasing.  
Press “Anti-creasing” button to activate.  
Anti-creasing is activated but the  
programme is running in the first  
exemplary figure. Drying is over and the  
first step of anti-creasing has started in the  
second figure.  
Cleaning the condenser  
Warning symbol turns on with certain  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
19  
intervals to remind that the condenser  
needs cleaning.  
3. Press “Start/Pause/Cancel” button. The  
Time delay symbol lights up. Pause  
symbol fades. Start symbol lights up.  
4. The “:” in the middle of the displayed  
time delay will start flashing.  
Door open  
Cancelling the time delay  
If you want to cancel the time delay  
countdown and start the programme  
immediately:  
Dryer door open symbol lights up.  
Time delay  
1. Press “Start/Pause/Cancel” button for 3  
seconds to cancel the programme.  
2. Then, press “Start/Pause/Cancel”  
button to start the desired programme.  
Starting the programme  
1. Press “Start/Pause/Cancel” button to  
start the programme.  
2. “Start/Pause” symbol will light up  
to indicate that the programme has  
started and “:” symbol between the  
remaining time will continue flashing.  
Progress of programme  
With the “Time delay” function you can  
delay the programme start up to 24 hours.  
1. Open the loading door and put the  
laundry in.  
2. Set the drying programme and spin  
speed, and if required, select the  
auxiliary functions.  
Anti-  
creasing  
Drying  
Wardrobe  
(Extra)  
3. Press “Time delaying” buttons “+” and  
“-” to set the desired time delay. The  
time delay symbol will flash.  
Iron  
Ventilation  
The progress of a running programme is  
shown through a number of symbols on  
the screen.  
4. Press “Start/Pause/Cancel” button.  
Then the time delay starts to count  
down. The Time delay symbol lights up.  
Start symbol lights up.  
At the beginning of each programme  
step, the relevant symbol in the series  
of symbols will light up and thus, all  
symbols will remain lit up at the end of  
the programme. The symbol that is lit up  
at the far right of the series of symbols  
indicates the step that is being carried out.  
“Drying”:  
The “:” in the middle of the displayed time  
delay will start flashing.  
More laundry may be loaded or taken out  
during the time delay period. At the end of  
the time delay countdown process, time  
delay symbol fades, drying process starts  
and the programme duration is displayed.  
The time on the display is the total of  
normal drying time and delay time.  
Time delay is started by pressing the start/  
pause/cancel button in the example figure.  
- Lights up in all programmes apart from  
drying and ventilation.  
“Iron Dry”:  
- Starts to illuminate when the drying  
degree reaches “iron dry” step and remains  
illuminated until the next step.  
“Cupboard Dry”:  
Changing the delay time  
If you want to change the time during the  
countdown:  
Starts to illuminate when the drying degree  
reaches “wardrobe dry” step, and remains  
illuminated until the next step.  
“Extra Dry”:  
Starts to illuminate when the drying degree  
reach to “wardrobe dry extra” step.  
“Refresh”:  
- Illuminates when the programme ends.  
C Anti-creasing icon will light up at the  
1. Press “Start/Pause/Cancel” button for  
3 seconds to cancel the programme.  
Time delay function must be set again  
for the required time.  
2. Press Time delay buttons “+” or “-” to  
set the desired time delay.  
Download from Www.Somanuals2.c0om. All Manuals Search And Download.  
EN  
end of the programme if anti-creasing  
function is active.  
laundry before the drying programme  
has started.  
C If you select a new programme by  
turning the programme selection knob  
while your machine is in standby,  
then the current program is cancelled  
and new programme information is  
displayed.  
Changing the programme after the  
programme has started  
You can use this feature to dry your laundry in a  
different program after your machine has started  
to run.  
Child-proof lock  
There is a child-proof lock to prevent  
any programme interruption due to the  
pressing of button while the programme is  
running. The loading door and all button  
except the “On/Off” button on the panel  
are deactivated when the child-proof lock  
is active.  
In order to activate the child-proof lock,  
press on the “audio warning” and “anti-  
creasing” buttons simultaneously for 3  
seconds.  
For example;  
Press and hold the “Start/Pause/Cancel”  
button for about 3 seconds to “Cancel”  
the programme in order to select “Extra  
Dry” programme instead of “Iron Dry”  
programme. Select the “Extra Dry”  
program by rotating the program knob.  
Press “Start/Pause/Cancel” button to start  
the program.  
To start a new programme after the  
programme is over or to interrupt the  
programme, the child-proof lock should be  
deactivated. Press the same buttons for  
3 sec. again to deactivate the child-proof  
lock.  
CIf you select a new programme by  
turning the programme selection knob  
while your machine is running, then the  
current program is cancelled and new  
programme information is displayed.  
Lock symbol will appear on the screen  
when the child-proof lock is activated.  
Adding/removing laundry in  
standby mode  
In order to add or take out laundry after  
the start-up of the programme;  
1. Press the “Start/Pause/Cancel” button  
to switch the machine to “Pause”  
mode. Drying process will stop.  
2. Open the door at Pause position and  
close it again after adding or taking out  
laundry.  
C Child-proof lock will also be deactivated  
when the machine is restarted by  
pressing the on/off button.  
When the child-proof lock is activated:  
• Display icons will not change even if the  
position of programme selection knob  
is changed while the machine is running  
or in halt.  
• If the child-proof lock is deactivated  
after changing the position of the  
programme selection knob while your  
machine is running, your machine stops  
and new programme information is  
displayed  
3. Press “Start/Pause/Cancel” button to  
start the program.  
C Any laundry added after the drying  
process was started may cause the  
already dried clothes in the machine  
intermingle with wet clothes and the  
result will be wet laundry after the  
drying process is over.  
CLaundry may be added or taken out  
as much as desired during a drying  
process, but as this process will  
interrupt drying continuously, it will  
extend the program duration and  
increase energy consumption.  
Therefore, it is recommended to add  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
21  
Ending the programme through  
cancelling  
A new programme can be selected and  
started after “Program cancel” is activated  
in order to change the drying program.  
To cancel any selected programme:  
Press “Start/Pause/Cancel” button for  
about 3 seconds. “Lint filter cleaning” and  
“Water tank” warning symbols light up and  
“End” label appears on the screen as a  
reminder at the end of this period.  
A As the inside of the machine will be  
excessively hot when you cancel the  
program while the machine is running,  
activate the ventilation program to cool  
it down.  
C If you change the position of  
programme selection knob while your  
machine is running, then the machine  
stops, current programme is cancelled  
and new programme information is  
displayed.  
End of programme  
“Filter cleaning” and “Water tank” warning  
symbols light up and “End” label appears  
on the screen in the programme follow-  
up indicator when the programme ends.  
The door can be opened and the machine  
becomes ready for a second cycle.  
Press “On/Off” button to turn off the dryer.  
C When selected, the 2-hour anti creasing  
programme will be activated to prevent  
laundry from creasing if you do not take  
the laundry out after the programme  
has come to an end.  
C Clean the filter after each drying (please  
see, Filter cleaning).  
C Drain the water tank after each drying  
(please see, Water tank)  
Download from Www.Somanuals2.c2om. All Manuals Search And Download.  
EN  
7 Maintenance and cleaning  
There are humidity sensors in your dryer  
that detect whether the laundry is dry or  
not.  
Filter Cartridge / Door Inner  
Surface  
Lint and fibres released from the laundry to  
the air during the drying cycle are collected  
in the “Filter Cartridge”.  
To clean the sensor:  
1. Open the loading door of the dryer.  
2. Allow the machine to cool down if  
drying has been carried out.  
3. Wipe the metal sensors with a soft  
cloth, dampened with vinegar and dry  
them.  
C Clean metal sensors 4 times a year.  
A Never use solvents, cleaning agents  
or similar substances when cleaning  
since these materials can cause fire and  
explosion!  
Water tank;  
The moisture in the damp laundry is taken  
from the laundry and condens ed. Drain  
the water tank after each drying cycle or  
during drying when “Water tank” warning  
light turns on.  
CSuch fibre and lint are generally formed  
during wearing and washing.  
C Always clean the filter and the inner  
surfaces of the cover after each drying  
process.  
A Condensed water is not drinkable!  
A Never take out the water tank when the  
programme is running!  
C You can clean the filter and filter area by  
vacuum cleaner.  
- Inside the drawer on the panel  
- Behind the kick plate cover  
If you forget to drain the water tank, your  
dryer will stop during the following  
drying cycles when the water tank is  
full and the “Water tank” warning light  
will turn on. If this is the case, press the  
“Start/Pause/Cancel” button to resume  
the drying cycle after draining the water  
tank.  
To clean the filter:  
1. Open the loading door.  
2. Remove the cover filter by pulling it up  
and open the filter.  
3. Clean lint, fibre, and cotton raveling by  
hand or with a soft piece of cloth.  
4. Close the filter and place it back into its  
seat.  
C Clogging may arise on the filter surface  
after using your machine for some time;  
if this occurs, wash the filter with water  
and dry it before using again.  
C Clean the entire inner surface of the  
cover and door gasket.  
To drain the water tank:  
1. Drain the water as shown on the  
picture .  
Sensor  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
23  
2. If there is lint accumulation in the water  
tank cover, clean it and press to close.  
3. Pull out the condenser.  
3. Place the water tank into its seat.  
For the condenser  
4. Clean the condenser by applying  
pressurized water with a shower head  
and wait until the water drains.  
Hot and humid air in the condenser is  
cooled with the cold air from the room.  
Thus, the humid air circulating in your  
dryer is condensed and then pumped into  
the tank.  
C Clean the condenser after every 30  
drying cycles or once a month.  
To clean the condenser:  
1. If a drying process has been carried out,  
open the door of the machine and wait  
until it cools down.  
5. Place the condenser in its housing.  
Fasten the 2 locks and make sure that  
they are seated securely.  
2. Unlock the 2 condenser locks after  
opening the kick plate.  
6. Close the kick plate cover.  
Download from Www.Somanuals2.c4om. All Manuals Search And Download.  
EN  
8 Suggested solutions for problems  
Drying process takes too much time  
• Meshes of the filter may be clogged. Wash with water.  
Laundry comes out wet at the end of drying.  
• Meshes of the filter may be clogged. Wash with water.  
• Excessive laundry might have been loaded in. Do not load the dryer in excess.  
Dryer does not switch on or the programme does not start. Dryer is not activated  
when set.  
• It might have not been plugged in. Make sure that the machine is plugged in.  
• The loading door may be ajar. Make sure that the loading door is properly closed.  
• Programme might have not been set or the "Start/Pause/Cancel" button might  
have not been pressed. Make sure that the programme has been set and it is not  
in “Pause” mode.  
• "Childproof lock" might have been activated. Deactivate the childproof lock.  
Programme has been interrupted without any cause.  
• The loading door may be ajar. Make sure that the loading door is properly closed.  
• Electricity may be cut off. Press "Start/Pause/Cancel" button to start the  
programme.  
Laundry has shrunk, become pilled or deteriorated.  
• A programme suitable for the laundry type might have not been used. Dry only  
the laundry which is suitable for drying in dryer after checking the labels on your  
clothes.  
• Select a programme with suitable low temperature for the laundry type to dry your  
clothes.  
Drum lightning does not come on.  
• Dryer might have not been started by using the "On/Off" button. Make sure that  
the dryer is on.  
• Bulb may have blown. Call the authorized service to replace the bulb.  
“Final / Anti-creasing” symbol flashes.  
• The 2-hour anti creasing programme to prevent laundry from creasing might have  
been activated. Turn off the dryer and take out the laundry.  
“Final / Anti-creasing” symbol is on.  
• Programme has come to an end. Turn off the dryer and take out the laundry.  
For products with a condenser:  
“Water tank” warning symbol is on.  
• Water may be full.  
• Anti-creasing programme might be running. Drain the water in the tank.  
“Filter cleaning” symbol is on.  
• Filter might have not been cleaned. Clean the cover filter.  
“Condenser cleaning” symbol is on.  
• Filter drawer/Condenser might have not been cleaned. Clean the filters in the  
condenser/filter drawer under the kick plate.  
A Call an authorised service if the problem persists.  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
25  
9 Guarantee  
Your new Blomberg product is guaranteed  
against the cost of breakdown repairs  
for 3 years from the date of the original  
purchase.  
Cookers  
• Gas Cookers must only be installed by  
a Gas Safe (or BORD GAIS) registered  
Gas Installer.  
• The guarantee is given only within the  
boundaries of the United Kingdom and  
the Republic of Ireland.  
• The guarantee is applicable only to new  
products and is not transferable if the  
product is resold.  
What is covered?  
• Repairs necessary as a result of faulty  
materials, defective components or  
manufacturing defect.  
• The cost of functional replacement  
parts, but excluding consumable items. • Blomberg disclaims any liability for  
• The labour costs of a Blomberg  
approved repairer to carry out the  
repair.  
incidental or consequential damages.  
• The guarantee does not in anyway  
diminish your statutory or legal rights.  
What is not covered?  
Should you experience any difficulty in  
obtaining service please contact the  
Blomberg Customer Help-Line.  
Tel: 0845 604 6859  
Transit, delivery or accidental damage  
or misuse and abuse.  
• Cabinet or appearance parts, including  
knobs, flaps, handles or container lids.  
• Accessories or consumable items  
including but not limited to, ice trays,  
scrapers, cutlery baskets, filters and  
light bulbs.  
• Repairs required as a result of  
unauthorised repair or inexpert  
installation that fails to meet the  
requirements contained in the user  
instruction book.  
• Repairs to products used on  
commercial or non-residential  
household premises.  
• Loss of frozen food in freezers or  
fridge/freezers. (Food loss insurance is  
often included within your household  
contents insurance policy, or may be  
available separately from your retailer).  
Important notes.  
Your Blomberg product is designed and  
built for domestic household use only.  
• The guarantee will be void if the product  
is installed or used in commercial or  
non-residential domestic household  
premises.  
• The product must be correctly installed,  
located and operated in accordance  
with the instructions contained in the  
User Instructions Booklet provided.  
• Professional installation by a qualified  
Electrical Domestic Appliance Installer  
is recommended for all Washing  
Machines, Dishwashers and Electric  
Download from Www.Somanuals2.c6om. All Manuals Search And Download.  
EN  
10 Service  
Please keep your purchase receipt or  
other proof of purchase in a safe place;  
you will need to have it should the product  
require attention under guarantee.  
You should also complete the details  
below; it will help us assist you when  
requesting service. (The model number  
is printed on the Instruction Booklet and  
the serial number is printed on the Rating  
Label affixed to the appliance)  
Model No:  
Serial No:  
Retailer:  
Date of purchase:  
Before requesting service please check the  
trouble-shooting guide in the Operating  
Instructions as a charge may be levied  
where no fault is found even though your  
product may still be under guarantee.  
Service once the manufacturers guarantee  
has expired.  
If you have purchased an extended  
guarantee please refer to the instructions  
contained within the extended guarantee  
agreement document. Otherwise please  
call the appropriate number above where  
service can be obtained at a charge.  
Should you experience any difficulty in  
obtaining service please contact the  
Blomberg Customer Help-Line.  
Tel: 0845 604 6859  
Download from Www.Somanuals.com.EANll Manuals Search And Download.  
27  
Blomberg, 36-38 Caxton Way, Watford,  
Hertfordshire, WD18 8UF  
Tel: 0845 6048340  
Fax: 0845 6004922,  
 

Black Decker Electric Heater OR07C User Manual
Bosch Appliances Computer Hardware DVA 08K User Manual
Bosch Appliances Home Security System 8500 User Manual
Boston Acoustics Portable Radio AM FM Radio User Manual
Brother Sewing Machine 885 X06 User Manual
Brother Sewing Machine BE 438F User Manual
Cadco Griddle CG 10 User Manual
Califone Headphones 1218AV 01 User Manual
Canon All in One Printer PIXMA MX420 User Manual
Casio Digital Camera QV R41 User Manual